RunRyder RC
 9  Topic Subscribe
WATCH
 1 page 3634 views
HelicopterFlybarless Rotor Head SystemsV-Bar › How do I use Switch Glo with V-Bar?
06-05-2010 01:55 AM  7 years agoPost 1
dansvt

rrApprentice

Miami, Florida USA

My Posts: All  Forum  Topic

Does anyone know how to do this?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 02:11 AM  7 years agoPost 2
jakeg1999

rrVeteran

San Diego, CA

My Posts: All  Forum  Topic

I have not set mine up quite yet, but I plan to Y-it off my gyro so that when I flip the gyro in and out of heading hold, it resets the tail and ignites the switchglo...

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 05:45 PM  7 years agoPost 3
misfits0311

rrKey Veteran

Santa Clarita, CA - USA

My Posts: All  Forum  Topic

Since when can you switch a Vbar out of head hold? Maybe I'm missing something here.

╘ₒ₲ₒ 6°° ƺƉ ṾЪ∂®

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-05-2010 06:04 PM  7 years agoPost 4
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Either separate RX (use any free channel) or if your using spektrum enabled Vbar with satellites you cannot use Switchglo and Governor (no free channels), if you dont run governor you put the switchglo into Rudder which is AUX2 out.

Make sure Aux2 under TX-Calibration Expert reads "6"

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 08:11 PM  7 years agoPost 5
Elgreco

rrVeteran

Montreal,QC-Canada

My Posts: All  Forum  Topic

I know it's a hassle but if you have the pro version you could order the button for it. No need for a channel. This is what I plan to do once I got my vbar in and convert my other 700..

Trex 550 V-BAR, Trex 700 V-BAR, N5-os55VBAR, TREX700E V-BAR /X9503

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 08:13 PM  7 years agoPost 6
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

what specifically is your problem? mine runs fine.

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-05-2010 08:35 PM  7 years agoPost 7
jakeg1999

rrVeteran

San Diego, CA

My Posts: All  Forum  Topic

You are right, can't switch out of heading hold....brain fart....got to figure this one out as well, maybe y-it with my multigov somehow.....

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 11:14 PM  7 years agoPost 8
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

still not sure what problem you guys are having. i have it running off channel 7 just fine. what's the issue we're trying to resolve here?

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-06-2010 01:55 AM  7 years agoPost 9
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

The new pushglow. Problem solved.

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-14-2010 12:15 AM  7 years agoPost 10
jrb600n

rrApprentice

East Hampton, NY

My Posts: All  Forum  Topic

Plug Switchglo into Aux on Vbar
In software set Aux 2 to 6
Program mix Thro=>Aux2
Set curve to +100 at pt 0 and -100to all others

Switchglo will activate when you move throttle above zero and bring it back to zero, but will not activate above zero. No hot starts

PM  EMAIL  GALLERY  Attn:RR  Quote
01-07-2013 04:51 AM  4 years agoPost 11
jdiaz

rrNovice

Battlestar Galactica

My Posts: All  Forum  Topic

Switch Glow on Vbar

OK GUYS....

Here is my setup:

I have a Trex 700N with a Spektrum DX8 and is working FINE !

Plug Switch Glow on Vbar Channel Rudd/Aux2
on software assign Aux2 to Chan 8
on the Radio set MIX to AUX3

Im using the Gear Channel to switch the Glow Plug on and off

- -Works FINE !!!

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 3634 views
HelicopterFlybarless Rotor Head SystemsV-Bar › How do I use Switch Glo with V-Bar?
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Wednesday, December 13 - 6:54 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online