RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 459 views POST REPLY
Scorpion Power ProModeler
HelicopterGasser Model RC HelicoptersOther › FBL Predator NX
06-03-2010 04:10 PM  7 years agoPost 1
Ironside

Senior Heliman

Baltimore, MD

My Posts: All  Forum  Topic

Just ordered a SK360 setup for my Predator but wanted to ask what follower and mixing arms I should use. Since the main shaft is 10mm and I plan to use the standard Predator head for now, could I use a Trex 600mm follower:

http://www.helidirect.com/align-mix...0fl-p-17754.hdx

with the Trex 700 Mixing Arms:

http://www.helidirect.com/align-mix...0fl-p-17747.hdx

or would the Trex 600 mixing arms work okay?

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 04:14 PM  7 years agoPost 2
Zman

Key Veteran

Florida

My Posts: All  Forum  Topic

Ironside.

Century makes a really nice 10mm follower that I am sure would work. I used it on my fbl radikal.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 04:24 PM  7 years agoPost 3
Ironside

Senior Heliman

Baltimore, MD

My Posts: All  Forum  Topic

I assuming your talking about this one:

http://www.heli-world.com/detail.aspx?ID=9423

Would I still need to use the Trex 700 arms or would the ones supplied work?

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 04:31 PM  7 years agoPost 4
Zman

Key Veteran

Florida

My Posts: All  Forum  Topic

Yes, that is the one. When you refer to the arms, are talking about the arms on follower? If so, I cant see any reason why they wouldnt work on the pred swash.
For my radikal, I simply just swapped out the head and mixing arm assembly for the fbl head and follower.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 04:58 PM  7 years agoPost 5
Ironside

Senior Heliman

Baltimore, MD

My Posts: All  Forum  Topic

Yes I did mean the arms on the follower -thanks for the answer. Do you think the Trex 600 follower and mixing/control arms would work okay? I figure I might be able to get it from the same place I ordered the SK360 and save a little on shipping.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 05:02 PM  7 years agoPost 6
Zman

Key Veteran

Florida

My Posts: All  Forum  Topic

If it is 10mm, I would bet on the side of working just fine but without seeing it in person, I can't give a total thumbs up. But a follower is a pretty simple design so I would bet on it working.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 06:12 PM  7 years agoPost 7
theriddick45

Veteran

United States

My Posts: All  Forum  Topic

Ironside.

Yes you can use the t600 in fact I'm using a RJX FBL head made for the T600 on my Predator with no problems. Check my gallery and you will see mine.

Hope this help!!

Suzi Janis 800e & 700e 3blade both w/Ikon

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 459 views POST REPLY
Scorpion Power ProModeler
HelicopterGasser Model RC HelicoptersOther › FBL Predator NX
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, August 18 - 11:54 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online