RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 334 views TOPIC CLOSED
Scorpion Power ProModeler
HelicopterAlignT-REX 600N › trex 600 n with revlock 10
06-03-2010 12:52 PM  7 years agoPost 1
datidun

rrKey Veteran

N Ireland

My Posts: All  Forum  Topic

Can anybody give me advice on running the trex 600 with a revlock 10 govener,the problem seems to come in when idle up mode comes in the tail moving side by side and the engine missing sort of on and off,what i have done so far is tuned the engine in well with the gov off at the momment running on the curves and is fine dead steady in both modes,when the gov is back on it starts ,i was thinking of adjusting the little pot on the gov ,thanx.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 12:56 PM  7 years agoPost 2
z11355

rrMaster

New England

My Posts: All  Forum  Topic

the reality is that what appears to be 'well tuned' to you isn't the same as well tuned for the governor.

certainly the small pot on the Revlock can play a part but you might want to slowly (!!!) lean out the engine a click or two at a time
and see if the performance improves. The Revlock is pretty sensitive to that.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 03:39 PM  7 years agoPost 3
datidun

rrKey Veteran

N Ireland

My Posts: All  Forum  Topic

thanx for the reply wonder if the sensor would do this its not staying on ,gone through the gov set up stage will keep trying.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 03:48 PM  7 years agoPost 4
z11355

rrMaster

New England

My Posts: All  Forum  Topic

what does that mean? if you run the sensor test, the LED doesn't *stay* lit?

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 334 views TOPIC CLOSED
Scorpion Power ProModeler
HelicopterAlignT-REX 600N › trex 600 n with revlock 10
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, August 24 - 2:12 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online