RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 601 views POST REPLY
Scorpion Power Scorpion Power
HelicopterEngines Plugs Mufflers Fuel › novarossi .57 raptor 50 tached tuned and ready to fly
06-03-2010 08:23 AM  7 years agoPost 1
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

everything is looking good now im ready to go to the field and
have someone to help me tune the high needle if i cant do it my self.

to me this engine was very easy to tune.

thanks again flyinghigh450 you rock brother and thanks to the guys here at rr who helped me learn how to tune.

tached speed was 1720 rpm

Watch at YouTube

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-03-2010 01:56 PM  7 years agoPost 2
bigwolf1

rrVeteran

USA

My Posts: All  Forum  Topic

That engine doesn't get happy till you get the head speed up around 1950-2100 with raptor gearing. you will need to tune for this head speed or you will be lean when you hit that speed if your tuned for 1750. bigger blades seem to best for that 57 like 620's

MAH blade Rep
Trex700LE
Magnum fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 03:15 PM  7 years agoPost 3
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

bigwolf1 That engine doesn't get happy till you get the head speed up around 1950-2100 with raptor gearing. you will need to tune for this head speed or you will be lean when you hit that speed if your tuned for 1750. bigger blades seem to best for that 57 like 620's
thank you friend

1750 is normal mode
1dleup one 1900 im breaking in the motor still

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-03-2010 07:36 PM  7 years agoPost 4
bigwolf1

rrVeteran

USA

My Posts: All  Forum  Topic

you can upgrade to the 8.7 ratio and lower the head speed and keep the engine happy too. I think it's PV 0518 main and pinion gear. Breakin is only 5 tanks.

MAH blade Rep
Trex700LE
Magnum fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 07:56 PM  7 years agoPost 5
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

bigwolf1 you can upgrade to the 8.7 ratio and lower the head speed and keep the engine happy too. I think it's PV 0518 main and pinion gear. Breakin is only 5 tanks.
must be wrong part # i cant find any where and what glow plug do you recommend ?

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-03-2010 08:05 PM  7 years agoPost 6
bigwolf1

rrVeteran

USA

My Posts: All  Forum  Topic

what fuel and what % I ran A5 OS plug with the .04mm shim on 20% CY wildcat.

http://www.amainhobbies.com/advance...PV0518&x=9&y=10

MAH blade Rep
Trex700LE
Magnum fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 08:36 PM  7 years agoPost 7
Gernejr

rrKey Veteran

Miami, Fl

My Posts: All  Forum  Topic

OS8 plug, Rotor Rage 30% ,.05 shim and 2200HS in Trex600N

Sponsored by Visa

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 10:08 PM  7 years agoPost 8
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

bigwolf1 what fuel and what % I ran A5 OS plug with the .04mm shim on 20% CY wildcat.

http://www.amainhobbies.com/advance...PV0518&x=9&y=10
raptor 50s have two type of gearing ?
i guess thats next o my list.

ordered 14 items today im bushed and broke

ENYA # 3 GLO PLUGS any good ?
Gernejr OS8 plug, Rotor Rage 30% ,.05 shim and 2200HS in Trex600N
ive been usein the os#8

if i want to run rich should i use a hot plug
?

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-04-2010 07:24 AM  7 years agoPost 9
bigwolf1

rrVeteran

USA

My Posts: All  Forum  Topic

enya 3 is too hot. OS 8 is med. A5 cold. The porting is pretty advanced the stock plug is the NR3 which is close to an A5. if you have bad vibrations add shim and go colder plug.

MAH blade Rep
Trex700LE
Magnum fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 601 views POST REPLY
Scorpion Power Scorpion Power
HelicopterEngines Plugs Mufflers Fuel › novarossi .57 raptor 50 tached tuned and ready to fly
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, October 19 - 2:50 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online