RunRyder RC
 4  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1682 views POST REPLY
ProModeler Scorpion Power
HelicopterFlybarless Rotor Head SystemsAlign 3G › Align 3G yes or no?
06-03-2010 12:35 PM  7 years agoPost 21
Turbonator

Heliman

Randfontein,Gauteng, South Africa

My Posts: All  Forum  Topic

Well I've got a TT setup and wouldn't want to give it a go on top regardless. The spot below just seems a bit to plastic to me. Its very thin and seems to have poor dimentional stabilaty. Mine's a bit bended to the left(looking from behind). The sensor woudn't be 90 deg with the main shaft.

HHH

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 12:36 PM  7 years agoPost 22
michael88997

Elite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

That's weird cause according to my 720 the top has less vib than they tray on my 500

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 12:48 PM  7 years agoPost 23
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

That issue could very well be model specific but good to note........Ron

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 01:12 PM  7 years agoPost 24
Turbonator

Heliman

Randfontein,Gauteng, South Africa

My Posts: All  Forum  Topic

The spot at the bottom seems a bit "fragile".... The plastic is very thin and mine is bended (for no apparent reason) a bit anticlock wise looking at it from the back. (Perhaps 5 deg)

This means that the sensor will not be 90 deg (and horizontal) with the main shaft! Is this an issue?

HHH

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 01:15 PM  7 years agoPost 25
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Yes it will be. It definitely needs to be @ 90°

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 01:30 PM  7 years agoPost 26
Individual1

Senior Heliman

Oregon

My Posts: All  Forum  Topic

Hehe

Ooops. I was talking about the t/r servo being mounted on the tailboom.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 02:20 PM  7 years agoPost 27
Individual1

Senior Heliman

Oregon

My Posts: All  Forum  Topic

Data

Is there any real data out there proving TT has more vibration than a belt?

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 04:58 PM  7 years agoPost 28
michael88997

Elite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

I think on a tt it depends on where u put the bearing and how straight ur tt is

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 06:05 PM  7 years agoPost 29
Individual1

Senior Heliman

Oregon

My Posts: All  Forum  Topic

Point

Ultimately this thread was suppose to address the Align 3G unit and if it was a nice piece of electronic Heli equipment. We all know something might be great in advertisement mode, but until it gets out there with the numbers.. You just don't know. Thus there's Runryder.

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 09:27 PM  7 years agoPost 30
scotty3

Senior Heliman

houston, texas - united states

My Posts: All  Forum  Topic

All in all just buy the 3g

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 10:04 PM  7 years agoPost 31
ludwig

Senior Heliman

welkom

My Posts: All  Forum  Topic

Go Align 3G I had no probs with it. took me only 2 flight to tune it in hehe

PM  EMAIL  GALLERY  Attn:RR
06-03-2010 10:14 PM  7 years agoPost 32
michael88997

Elite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

Yup just go for it... Keep in mind what I told u before, the extra money is not only towards the 3g, but also metal geared servos that won't strip on a crash

PM  EMAIL  GALLERY  Attn:RR
06-04-2010 12:04 AM  7 years agoPost 33
Individual1

Senior Heliman

Oregon

My Posts: All  Forum  Topic

Crash?

Umm... Didn't I tell you guys.. I don't crash.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1682 views POST REPLY
ProModeler Scorpion Power
HelicopterFlybarless Rotor Head SystemsAlign 3G › Align 3G yes or no?
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, August 18 - 4:08 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online