RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 462 views POST REPLY
Scorpion Power ProModeler
HelicopterMain Discussion › Replace/swap switch on DX5 sim transmitter
06-01-2010 02:35 AM  7 years agoPost 1
Scott1115

Elite Veteran

Greenwich, CT

My Posts: All  Forum  Topic

Lets just say I had a minor "anger management" burst and the Tx for the sim "flew" out of my hand.....

The switch on the far left (used for throttle hold) broke. Can I swap it with the one on the far right that says 'rate?'

If so, how? Can I just unscrew them from the tx or do I need to open it up to swap them.

PM  EMAIL  GALLERY  Attn:RR
06-01-2010 02:36 AM  7 years agoPost 2
george0079

Elite Veteran

USA

My Posts: All  Forum  Topic

you'll need to open it up and do some soldering work...

Hell... I can fix that.
Uh oh..
Nope.
It's ***ked!!!
RE-KIT!!!!!

PM  EMAIL  GALLERY  Attn:RR
06-01-2010 03:15 AM  7 years agoPost 3
chickens2252

Senior Heliman

Okinawa

My Posts: All  Forum  Topic

Lots of places sell the switches such as tower.

http://www3.towerhobbies.com/cgi-bi...093p?&C=MZB&P=7

It will only have two wires for that switch but three posts. They are fairly universal. I have a Futaba switch in my JR now. I wouldn't recommend your local electronics store though, unless your in Europe. The switches have a 6mm throat. The closest you will find is 1/4in. It can be done but it will be ugly.

PM  EMAIL  GALLERY  Attn:RR
06-01-2010 03:19 AM  7 years agoPost 4
fung_jeff

Key Veteran

Vancouver, BC, Canada

My Posts: All  Forum  Topic

+1 for chicken 5.59 bucks for a rage is cheap lol... Hoped your Heli wasn't somewhere close.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 462 views POST REPLY
Scorpion Power ProModeler
HelicopterMain Discussion › Replace/swap switch on DX5 sim transmitter
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Saturday, August 19 - 2:41 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online