RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1143 views POST REPLY
ProModeler Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › Torque precomp. (pitch,cyclic)
05-31-2010 08:01 AM  7 years agoPost 1
Raptile

Senior Heliman

SLOVENIA-Logatec (EU)

My Posts: All  Forum  Topic

Hi I am wondering myself what is this 2 settings in V-Stabi program ... Its located in Tail setting.

My tail swings a little bit when I do crisp climbouts and even more swinging when I do flips or rolls ...

Should I raise TORQUE PRECOMP. PITCH and CYCLIC ? They are 18 and 9 at the moment (stock settings)

Al the tail stuff is OK (GyroGain 95, Rate 110, P-85, I-65, Accel.-80)

Thanks

Regards
Borut

Futaba FASST 12FG | Raptor 90 V-Max V-BAR 4.0| Henseleit TDR 4.0 | PiroFreak =)

PM  EMAIL  GALLERY  Attn:RR
05-31-2010 08:33 AM  7 years agoPost 2
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

It's like RevoMix, first, make sure it goes in the correct direction, when you move pitch slider from zero pitch to max pitch the tail slider should move the same as doing nose right turn (clockwise)
If that is correct, raise it to take away the kick.

But also make sure you have max gain (gyro gain) as you can have without wag.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR
05-31-2010 02:05 PM  7 years agoPost 3
Raptile

Senior Heliman

SLOVENIA-Logatec (EU)

My Posts: All  Forum  Topic

Found the selution MrMel It was in miniV-bar mounting ...First I use original foam for unit ...which soon ripped out becouse the cables are to tight and the unit was moving a lot. I replace with Futaba foam and make unit more stable ... now the tail swinging dissapear

Futaba FASST 12FG | Raptor 90 V-Max V-BAR 4.0| Henseleit TDR 4.0 | PiroFreak =)

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1143 views POST REPLY
ProModeler Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › Torque precomp. (pitch,cyclic)
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, August 17 - 4:55 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online