RunRyder RC
 9  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4797 views
Helicopter
e-
Align
T-REX 700 › Best BEC for 12s setup??
06-02-2010 05:26 PM  7 years agoPost 21
msg73

rrApprentice

NJ

My Posts: All  Forum  Topic

I'm setting up a 12s FBL Logo 500 and was considering the CC Bec Pro, but after researching a bit I decided it wasn't worth the risk. I'm going to run a 2s 1000-1500mah lipo through a standard bec. If the bec fails, only 7.4v or less will flow through the electronics...not sure if that will still fry the electronics though.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2010 07:20 PM  7 years agoPost 22
duke666

rrKey Veteran

Hampshire, UK

My Posts: All  Forum  Topic

If the bec fails, only 7.4v or less will flow through the electronics
Or nothing..........

I'm with Jag, only ever used the WR and never had a glitch. The newer 10/15A is great.

http://www.western-robotics.com/her...per-BEC_hp.html

Duke

OOOPPS............

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-03-2010 06:39 PM  7 years agoPost 23
Rogman88

rrElite Veteran

West Monroe, LA

My Posts: All  Forum  Topic

Flown over 50 flights with my CC pro on 12S setup and no problems so far. I wouldn't have done this had I read this thread I'm of the school of thought, if it ain't broke, don't fix it so just going to leave it on my trex 600 and hope nothing happens. When I go to a 700 sized heli, I'll probably go the 2S direct route with outrage servos and step down to whatever can't handle 7.2 volts.

High Voltage just works better

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-03-2010 07:03 PM  7 years agoPost 24
WJackson

rrElite Veteran

Smyrna, Delaware

My Posts: All  Forum  Topic

Quite honestly the best unit I see right now for specifically the 3G is the SG Reactor because the servos plug directly into it. Eliminating any potential issue with the power bus on the 3G.

RIP Roman
Bill Jackson
AlignUSA

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-29-2011 02:17 PM  6 years agoPost 25
MoneyMike

rrNovice

corpus christi, tx usa

My Posts: All  Forum  Topic

I got the reactor x2 on my Trex 700E, looked like it was going to work good. Get it out to the field, and no cyclic movement at all. Put an align stock BEC on it and all was good to go..I'm also using the Kontronics 120HV ESC with the internal BEC bypassed..

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4797 views
Helicopter
e-
Align
T-REX 700 › Best BEC for 12s setup??
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Saturday, December 16 - 3:37 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online