RunRyder RC
 7  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1569 views
Helicopter
e-
Mikado
Other › Thinking about a 600SE and have some ?
06-02-2010 10:39 PM  7 years agoPost 21
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

I think the public will see the REAL logo 700 shortly (as not doubt the team pilots will have them in the next 4-8 weeks???) 3DM is coming up.

Lucky people you are.

Still not sure how the germans stay so tight lipped about it all.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2010 11:01 PM  7 years agoPost 22
BOOGIE

rrElite Veteran

LAFAYETTE LA

My Posts: All  Forum  Topic

I was hoping they had some 600SEs packed up in the same shipment as the last Vbars

MSH USA / Lynx Heli Innovations

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 12:21 AM  7 years agoPost 23
rich m

rrVeteran

Stroudsburg, PA. USA

My Posts: All  Forum  Topic

Your right Dave. I must have been thinking of the 30mm motor mount. Sorry. I bought the counterbearing just to protect my pack from the pinion in a crash but it is totally unnecessary with a 6mm shaft.

Team Heli Wholesaler

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 12:55 AM  7 years agoPost 24
Maxime30

rrApprentice

Quebec City, Canada

My Posts: All  Forum  Topic

My friend made a 30 to 25mm adapter for my Pyro motor.

KDE has a CB that *might* fit the Logo

http://www.kdedirect.com/TREX700NEPS.html

Max

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 05:20 PM  7 years agoPost 25
worldofmaya

rrApprentice

Graz, Styria - Austria

My Posts: All  Forum  Topic

helicraze wrote: Note that the CB does not work with 30MM spacing motors like the pyro and the motors that scorpion send mikado
Where did you get that information? I just checked that and the Scorpion kits my LHS gets (as well as the old Hacker set)came with 25mm motor mount (of course the motor has that too).
The Pyro combo comes with 30mm motor mount for the Pyro.

@Maxime30: we had Mikado offered the 30mm motor mount. The problem is that the pinion sits lower which adds load on the bearings.
-klaus

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 06:43 PM  7 years agoPost 26
rich m

rrVeteran

Stroudsburg, PA. USA

My Posts: All  Forum  Topic

I think that you may not be understanding what he is saying. He didn't say that there wasn't a motor mount. He was saying Mikado does not make a counter bearing for a motor with 30mm spacing.

Team Heli Wholesaler

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2010 06:52 PM  7 years agoPost 27
worldofmaya

rrApprentice

Graz, Styria - Austria

My Posts: All  Forum  Topic

I understood that... and as written there was an adapter done by a German company until Mikado came up with another motor mount.
The question is if a longer distance with counter bearing is better than no counter bearing and shorter distance. As already written you have to set it right anyway and than you don't need a counter bearing, at least that's what Mikao says about this topic. They'll not produce one for 30mm.
I would say a Pyro with its small bearings and shaft needs it more than a 40mm Scorpion. But that's just my opinion...
-Klaus

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1569 views
Helicopter
e-
Mikado
Other › Thinking about a 600SE and have some ?
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Saturday, December 16 - 5:16 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online