RunRyder RC
 8  Topic Subscribe
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 3162 views
Helicopter
e-
Align
T-REX 450 › strange sound help
01-03-2010 06:16 AM  7 years agoPost 1
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

i have the scorpion 2221-6 with a 12t pinion and thunderpower
2250 45c battery
when the rpm gets up it sounds like a wierd noise comeing from the canopy , or is it just power.

Watch at YouTube

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-03-2010 07:19 AM  7 years agoPost 2
LonR

rrElite Veteran

Macomb,Mi

My Posts: All  Forum  Topic

Maybe the bearings in the motor.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-03-2010 08:18 AM  7 years agoPost 3
Dale M

rrApprentice

Lakewood Ca USA

My Posts: All  Forum  Topic

Are the flybar paddles in alignment? It surely doesn't sound correct.

AMA #99382

PM  EMAIL  Attn:RR  Quote
01-03-2010 09:15 AM  7 years agoPost 4
nivlek

rrProfessor

Norfolk England

My Posts: All  Forum  Topic

Does it still make the same noise if you lift it into the air , or if you run it upon a soft surface ?

At the end of the day , it gets dark .

PM  EMAIL  Attn:RR  Quote
01-03-2010 09:56 AM  7 years agoPost 5
russ

rrApprentice

england

My Posts: All  Forum  Topic

wickedclown
can you tell me where to buy them from thanks

russ

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2010 02:54 PM  7 years agoPost 6
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

where to buy what from russ ?

and it seems to make that sound at half stick .

im gonna check the paddles fpr level and check the blade tracking.

and if i cant find the problem ill start replaceing bearings
the motor is brand new .

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-03-2010 03:31 PM  7 years agoPost 7
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

paddles where off a bit and it looks like the canopy might be getting close to the main gear gonna fly it today .

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-03-2010 06:41 PM  7 years agoPost 8
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Is your tail rotor shaft straight? And is your tail rotor assembly balanced? A slight bend back there, or out of balance tail, can make noise like that while it vibrates the living daylights out of your airframe and electronics.

If you lift off to a hover, are the skids a blur?

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2010 07:56 PM  7 years agoPost 9
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

the tail belt was lose , i almost took out the camera nam watch him get a shave.

that may have been were the noise was coming from.

Watch at YouTube

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-03-2010 08:09 PM  7 years agoPost 10
russ

rrApprentice

england

My Posts: All  Forum  Topic

where to buy what from russ ?

where to buy the trex cone from ta.

russ

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2010 08:37 PM  7 years agoPost 11
Fnity

rrKey Veteran

Socal - Lafayette, IN

My Posts: All  Forum  Topic

what is your head speed??

Frank Leyva
Rave, Next-D, Radix
Scorpion Power Systems
GensACE

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2010 11:17 PM  7 years agoPost 12
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

3400 rpm

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-04-2010 06:06 AM  7 years agoPost 13
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

the sound is comeing from the tail boom the belt inside makes the noise inside the boom until i get past half stick then it goes away
can the tail belt be to tight ?

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-04-2010 01:31 PM  7 years agoPost 14
str8den

rrVeteran

NE U.K

My Posts: All  Forum  Topic

the tail belt was lose , i almost took out the camera nam watch him get a shave.
loose belt might be making the noise; cr@p flying is what gave the cameraman a fright.

BEEN IGNORED TOO - must admit i was a bit more blunt than epfrisbee and hiflyer450, but we are being HONEST! No.4, anyone else??

PM  EMAIL  GALLERY  Attn:RR  Quote
01-04-2010 02:33 PM  7 years agoPost 15
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

[quote]loose belt might be making the noise; cr@p flying is what gave the cameraman a fright.

lol thank you for your opinion but the problem is the tail gear
watch the guys vid he explains the problem.

and since i put the new super battery and supper motor the clone
tail drive cant keep up.

and crappy pilots could not save a heli the way that i did .

Watch at YouTube

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-05-2010 09:27 PM  7 years agoPost 16
EP Frisbee

rrNovice

Poland

My Posts: All  Forum  Topic

it was pure luck you didn't hit the man behind the camera, not skill - so why didn't give a right aileron input when she swung around on ya? after all, i think we've all had a tail thats let go on us a few times, and if you call 'that' skill, i hate to think if you messed up!
maybe that vid could be put in the 'safety/helis arent toys' section.

*unable to add further on this as i have been blocked/ignored (*edit 12/06/10) - and can not respond to being called an idiot LOL - same as highflyer450!!

PM  EMAIL  Attn:RR  Quote
01-05-2010 10:45 PM  7 years agoPost 17
LonR

rrElite Veteran

Macomb,Mi

My Posts: All  Forum  Topic

wc_wickedclown
and crappy pilots could not save a heli the way that i did .
That was far from a save and you allmost hit the guy.Like EP Frisbee said,that was 100% luck because if it was any lower when the tail spun around you would of for sure hit him.Your trying to make the heli super fast and that video should show you that you need to learn to control it before someone gets hurt.IMO you should learn to fly it before thinking about all that other stuff and put the Raptor 30 away.Not telling you what to do,just advice.A save is having your heli under control and keeping it away from people,If you don't know what that 450 will do to someone if it hits someone check out the safety section.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-05-2010 11:51 PM  7 years agoPost 18
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-06-2010 12:00 AM  7 years agoPost 19
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-06-2010 12:06 AM  7 years agoPost 20
LonR

rrElite Veteran

Macomb,Mi

My Posts: All  Forum  Topic

1.Noone called you a crappy pilot

2
flyinghigh you know better then to join in on the insult crew lol
Where did I????????????

3 I don't think you'll get much help/advice being a smart mouth.Im done and good luck with everything.

He put me on ignore but had to send me a pm calling everyone thats helped or given him advice some nice names .He will ask for help/advice but back stabs people through pms (not the first time he did this) when he gets it.My reply was looking out for him and others around him but I guess others and I are a-holes for doing that .Pretty cool person huh .If anyone wants to know what he says behind your back for helping him i'll forward the pm,kinda messed up if you ask me.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 3162 views
Helicopter
e-
Align
T-REX 450 › strange sound help
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Tuesday, December 12 - 8:06 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online