RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 636 views POST REPLY
Scorpion Power Scorpion Power
HelicopterGasser Model RC HelicoptersOther › (Governor/Sensor/Magnet) something to ponder for your gasser
01-03-2010 12:02 AM  7 years agoPost 1
Gearhead

rrMaster

Vt

My Posts: All  Forum  Topic

keep in mind this should work on most all gassers,,

I have always hated how close the Governor's Sensor has to be mounted to the Magnet, if it's not mounted well and it becomes loose the Sensor could hit the Magnet or fan (not good),,

well if you use the JR RevLimit Sensor you wont need to mount it so close to the Magnet,, I use a RevLimit Sensor with my Muligov on my OS 50 and the Sensor is 3 to 4mm away from the Crank-Pin, so if you use a Magnet with the RevLimit Sensor you should be able to get a good clearance between the 2,,

you may have to make a new mount for the Sensor but the extra clearance in the gap will make things a little safer, and easier ,,

NOTE,,
before committing to the mounting make sure,,
A) the JR RevLimit Sensor works with your Governor,,

B) and make sure the Sensor works with your Magnet..

no need to thank me, it's just one of my sacrifices I will do for our enjoyment of the hobby

http://www.horizonhobby.com/Product...?ProdID=SPM6823

Jim
Buzz Buzz Buzz

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 636 views POST REPLY
Scorpion Power Scorpion Power
HelicopterGasser Model RC HelicoptersOther › (Governor/Sensor/Magnet) something to ponder for your gasser
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, October 17 - 7:56 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online