RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1017 views
Helicopter
e-
BEAM
Other › Vibrating tail
01-01-2010 10:11 AM  7 years agoPost 1
Ufoman

rrNovice

Lausanne - Switzerland

My Posts: All  Forum  Topic

Hi everybody !

My tail is vibrating in flight. The tail vertical fin and the tail housing are vibrating.

But when the beam is on the ground (so with the same headspeed) no vibrations !! As soon as taking off, vibrations appear ! And in idle-up mode, there is less vibrations !

What could be the problem ? Is it normal that the vertical fin appear fuzzy due to vibrations ??

Thank you very much and happy new year from Switzerland !!!

PM  EMAIL  Attn:RR  Quote
01-01-2010 02:59 PM  7 years agoPost 2
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Check the tracking on the tail rotor blades.

PM  EMAIL  Attn:RR  Quote
01-01-2010 10:02 PM  7 years agoPost 3
CoasterFuelPhil

rrApprentice

Rochester, NY

My Posts: All  Forum  Topic

Try checking your main blade balance, I found that when mine were out of balance it would vibrate in normal mode and then go away in idle up mode. Also check the tail shaft to see if its bent.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1017 views
Helicopter
e-
BEAM
Other › Vibrating tail
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, December 13 - 9:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online