RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1058 views
01-01-2010 05:28 AM  7 years agoPost 1
krashtagain

rrKey Veteran

ohio

My Posts: All  Forum  Topic

I just installed a set of 8311's in my 47 .

Do I have to set the rev switches as the manual says to set them using JR radio ? Because I did .

Checking the pitch directions on each head I found the RE was going the wrong direction . The FP and FA were going the wrong way .

So I got into the program in the mixer and changed the RE output and FA and FP output to get the direction going the correct way and that fixed the issues on the pitch for both heads but now the AIL direction has changed and is wrong on both heads , and it was correct before I changed the outputs on the above listed .

The servos are plugged in correctly before anyone asks .

If you're not living on the edge you're just taking up space !

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2010 04:52 PM  7 years agoPost 2
krashtagain

rrKey Veteran

ohio

My Posts: All  Forum  Topic

Had the FA plugged into wrong hole . Fixed .

If you're not living on the edge you're just taking up space !

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1058 views
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, December 16 - 10:45 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online