RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1540 views
Helicopter
e-
Blade
Blade MSR › 2nd mSR flies terrible and is not as good as my 1st mSR
12-31-2009 05:51 PM  7 years agoPost 1
gaHeliMan1181

rrNovice

savannah, ga

My Posts: All  Forum  Topic

Long story short my first mSR needed factory repairs so while i was waiting for that i bought another mSR.

The 2nd mSR came from the same online store bought one month after the first mSR but is no where near as good.

First thing i noticed about the new mSR is the tail motor doesn't have a protective cover around the wires. wtf??? how can one i bought a month ago have the updated cover and the one i just got has the old tail motor where you can see all the wires and the cap will probably pop off.

Second thing this new mSR flys like crap. It hops around and wobbles so much it cannot keep a hover. I spent the first 2 batteries trying to trim it. On the third battery i went to fly it and it is out of control. It spins out with the slightest of right rudder. I cant even make a circle around my den because it spins out so much.

third the wire that goes from the tail to the 5n1 is not long enough. The connector is just barely in the 5n1. While flying twice it came un done and the heli started spining and crashed landed. I could unwrap the wire and wrap it around only twice but then there would be extra wire hanging.

So i am pretty upset...it feels like i got a lemon. How the heck did this happen.
What can i do to fix some of my problems i am having.

thanks

PM  EMAIL  Attn:RR  Quote
12-31-2009 07:58 PM  7 years agoPost 2
gaHeliMan1181

rrNovice

savannah, ga

My Posts: All  Forum  Topic

UPDATE

I think there is something wrong with the gyro. When i plug the battery in the gyro doesnt make the noise it normally does when it is setting up. You can barely even hear it make a noise after you hook the battery and wait for it to set.

It is flying like one does if you move the heli around while the gryo is setting up.

When the heli is in the air it will start to move all around. Also if you get it trimmed enough to fly around it will lock up and fly in one direction until it falls.

I mean what the heck. I can understand having 5n1 problems with a heli that has taken some really hard hits but this heli is brand new.

I really like the mSR but i seem to be having more problems than most.

PM  EMAIL  Attn:RR  Quote
12-31-2009 09:46 PM  7 years agoPost 3
gaHeliMan1181

rrNovice

savannah, ga

My Posts: All  Forum  Topic

E-Flite is sending me a new tail motor assembly. They think the one that came with my heli is messed up.

Atleast they have good customer support.

PM  EMAIL  Attn:RR  Quote
01-04-2010 06:53 AM  7 years agoPost 4
gaHeliMan1181

rrNovice

savannah, ga

My Posts: All  Forum  Topic

The problem with my heli is definitly a tail motor. I pulled it back out tonight to see if i could get it to fly right and the dang tail motor wouldnt even turn at all.

Brand new mSR with a broken tail motor. I can't wait till i get a new motor to see if it flys good again.

Its very crappy how quick that motor went out but still i love the mSR

PM  EMAIL  Attn:RR  Quote
01-06-2010 09:58 PM  7 years agoPost 5
gaHeliMan1181

rrNovice

savannah, ga

My Posts: All  Forum  Topic

BACK IN BUSINESS!

Got my new tail motor from Eflite and it even came with the updated end cap on it. Heli flys great! I love eflite customer service. Top notch!

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1540 views
Helicopter
e-
Blade
Blade MSR › 2nd mSR flies terrible and is not as good as my 1st mSR
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, December 13 - 11:21 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online