RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 468 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsOther › sk360 set up help needed!!
12-31-2009 07:07 AM  7 years agoPost 1
yoshgixxer

rrVeteran

york PA usa

My Posts: All  Forum  Topic

ok so this is my first FBL system.. im like 90% there..i got everything set up good i thought untill i bench tested the gyro unit..when i roll the heli right the swash tilts left..ok good..when i tilt the nose up it pitches up..like all three servos move up??? WTF! if it sits on the bench and i use the radio the swash works 100% correct..pull back swash tilts back right swash tilts right..its only when the 360 puts in the elevator comand its messed up??

Oh yea i also noticed when i go from full pitch to full neg pitch the elevator servo moves faster then ptch and ail. so somthing is up with the elev. command?

When i did the test i got green boxes for nose up and bank right and i picked "rotate 90 deg." in gyro direction...

and lastley i have no clue what anything in the "advanced" box dose! hahaha

ok its 2am and my eyes hurt!

dude..wheres my heli?????ama#902014

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 12:15 PM  7 years agoPost 2
popiterflyer

rrApprentice

Va

My Posts: All  Forum  Topic

Its pretty hard to see just the one servo move because as soon as you stop moving the other 2 will automatically try to level the heli. I have never heard of a unit moving all 3 to correct elevator.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 02:00 PM  7 years agoPost 3
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

With the SK360 in setup mode, does cyclic and collective work properly?
Radio is set up in "1 servo" mode?

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 06:41 PM  7 years agoPost 4
yoshgixxer

rrVeteran

york PA usa

My Posts: All  Forum  Topic

Cyclic and colective works as normal on set up mode an even in flight mode.. It's just wen u tilt the hilcopter fore or aft it moves all three up and down.. It's like the elevator servo is reversed but only when the gyro operates the servos not when comanded by the radio...

dude..wheres my heli?????ama#902014

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 06:42 PM  7 years agoPost 5
yoshgixxer

rrVeteran

york PA usa

My Posts: All  Forum  Topic

Radio is set to one servo

dude..wheres my heli?????ama#902014

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 07:29 PM  7 years agoPost 6
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

can you screen capture each of the tabs in the setup program and post here?

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 08:01 PM  7 years agoPost 7
yoshgixxer

rrVeteran

york PA usa

My Posts: All  Forum  Topic

how do i screen capture?

dude..wheres my heli?????ama#902014

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2009 08:20 PM  7 years agoPost 8
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

Ctl-Print Screen to capture, and paste into paint.
Use Alt-Print Screen for a single window

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR  Quote
01-02-2010 06:02 AM  7 years agoPost 9
yoshgixxer

rrVeteran

york PA usa

My Posts: All  Forum  Topic

ok i got it figured out..i had some how plug two of the input leads from the reciever to the unit in backwards..whoops! all is working A ok now!..soon the dreaded test flight...

dude..wheres my heli?????ama#902014

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 468 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsOther › sk360 set up help needed!!
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Wednesday, October 18 - 12:13 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online