RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 454 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 600 › Power Plant
11-16-2009 07:46 PM  8 years agoPost 1
mirmanchuck

rrApprentice

Venice Fl.

My Posts: All  Forum  Topic

What motor and ESC combo is best for mild 3D? I am asking because I put 5 flights on the align 650 and it took a dump, and I was told not to buy another align.

SpectraG/3Dmax
Trex600esp BeastX DFC
QAV500G Multirotor

PM  EMAIL  GALLERY  Attn:RR  Quote
11-16-2009 07:49 PM  8 years agoPost 2
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

well for the 600 you want at least a 8s battery, I have a 6s and it is just not enough. as for the esc the castle 85hv is a great controller. you probably want a scorpion motor as they tend to be very well priced and very nice motors.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-16-2009 07:58 PM  8 years agoPost 3
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

this would be a good scorpion motor.

http://www.innov8tivedesigns.com/pr...products_id=569

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-16-2009 09:08 PM  8 years agoPost 4
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Stock power system is more than enough for mild 3D. However if your motor is toast I would replace it with a Scorpion 4025 1100kv motor.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-16-2009 10:07 PM  8 years agoPost 5
mirmanchuck

rrApprentice

Venice Fl.

My Posts: All  Forum  Topic

do you have to cut the frame to install a scorpion 4025?
\600esp

SpectraG/3Dmax
Trex600esp BeastX DFC
QAV500G Multirotor

PM  EMAIL  GALLERY  Attn:RR  Quote
11-16-2009 10:27 PM  8 years agoPost 6
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

no, it is a pnp upgrade.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-17-2009 02:23 AM  8 years agoPost 7
Spitfire1

rrElite Veteran

Perth Australia

My Posts: All  Forum  Topic

You do have to cut the frame, but its hardly anything, takes about 30 seconds with a dremel.
Dont expect much of an increase in the way of performance, but they stay cool even after back to back flights, and there cheaper also.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-17-2009 02:40 AM  8 years agoPost 8
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

well it should be a performance increase from the 600l on 6s.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-17-2009 10:27 AM  8 years agoPost 9
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

I put the 4025 890kv in mine on a 20T pinion and it rocked the sky! Good 6s packs are the key, 30C+.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-17-2009 11:17 AM  8 years agoPost 10
mirmanchuck

rrApprentice

Venice Fl.

My Posts: All  Forum  Topic

If I run the scorpion 4025-1100 what pinion gear do I use to get 2000 headspeed?

SpectraG/3Dmax
Trex600esp BeastX DFC
QAV500G Multirotor

PM  EMAIL  GALLERY  Attn:RR  Quote
11-17-2009 11:32 AM  8 years agoPost 11
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

14T at 100% throttle will get you 2000 unloaded. That would be a very efficient setup. I would get a 15T also and see which you like best.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 454 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 600 › Power Plant
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, November 22 - 3:01 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online