RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 423 views POST REPLY
Helicopter
e-
Align
Other › help with align 2 in 1 reg.
10-24-2009 11:35 PM  8 years agoPost 1
love for scale

rrVeteran

Omaha, Nebraska U.S.A.

My Posts: All  Forum  Topic

hello switchitng to lipos for my servos on all my helis. going to use the 2in1 regulator. can anyone tell me if the regulator will except deans connector from the battery? also i have a step down for the tail. align 5.1 v 2 way step down. the directions show putting the step down between the gyro and the tail servo. thus only steping down the servo? i am using a futaba 401 which cannot handle over 4.8v (5.1 ok). so woulnt i put step down between rx and gyro, thus stepping down both gyro and servo.

greg

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 12:01 AM  8 years agoPost 2
Santymar

rrNovice

Quito, Ecuador

My Posts: All  Forum  Topic

Yes, it is possible use dean connectors, but they are big for me, I use the original conectors. Put the step down betwen servo and gyro, gyro don´t need 5.1V.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 12:23 AM  8 years agoPost 3
itsjojo

rrKey Veteran

North East Pennnsylvania

My Posts: All  Forum  Topic

I soldered a large deans connector on my 2 in 1 on my Trex 600 nitro. Works fine. I fly a 4200 mah pack on my 600. I use the 5.1 step down between my 401 and Futaba 9254 tail servo. Input of the 2 in 1 is 7.4volts. 2 in 1 Output voltage:6A 5.8V(For receiver/servo) 5A 1.5V(For Glow plug)

The 2 in 1 knocks down the voltage enough to plug in the 401 into the rudder channel. I due use the 5.1 step down for the tail servo rated at 4.8V
Hope this helps

Jojo

JoJo
Foreseeing My Flybarless Future!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-27-2009 12:51 AM  8 years agoPost 4
HybridHeli

rrApprentice

East Texas lawman

My Posts: All  Forum  Topic

The Fut 401 gyro is ok with 6V.
Not sure what servo for tail you are running

__________
nothing automatic about autorotations man..

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
10-28-2009 12:36 AM  8 years agoPost 5
chopper_crazy

rrElite Veteran

Delphos, Ohio

My Posts: All  Forum  Topic

I use a deans connectors with all my 2n1 and lipo batteries. Before I used the small red JST connector but I was afraid of the durability with constantly plugging and unplugging it.

It's a complex, costly, glow powered anti-gravity machine!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 423 views POST REPLY
Helicopter
e-
Align
Other › help with align 2 in 1 reg.
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, January 23 - 10:17 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online