RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 1321 views POST REPLY
Helicopter
e-
Electric Motors-Controllers-ESC
Other › Turnigy Sentry 60a ESC
10-24-2009 06:53 PM  8 years agoPost 1
to-fast-to-new

rrNovice

Baltimore, md

My Posts: All  Forum  Topic

I will be getting an align 60amp esc but I'd like to know how the TURNIGY sentry 60amp esc would hold up too these electronics. Scorpion HK 3026-1400kv motor/ 3x align ds510/ 1x align ds520/ Futaba 401 or align gp750/ & AR6200 RX. Will this esc get the job done with no worries?

belt-cp / (3) exi 450v2 / (1) exi 450v2 cf / exi 500 cf-now trex 500 / trex 600efl pro

PM  EMAIL  GALLERY  Attn:RR  Quote
10-24-2009 06:59 PM  8 years agoPost 2
to-fast-to-new

rrNovice

Baltimore, md

My Posts: All  Forum  Topic

BTW. I'll be using a 6cell 35c 3000mah winforce battery & a TURNIGY 6cell 2650mah 30c battery.

belt-cp / (3) exi 450v2 / (1) exi 450v2 cf / exi 500 cf-now trex 500 / trex 600efl pro

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 01:09 AM  8 years agoPost 3
jgunpilot

rrKey Veteran

Pollock, LA

My Posts: All  Forum  Topic

The Turnigy battery you have is excellent. I had the Turnigy ESC, but because it has no governor, I went to a Castle Creation 75A ICE ESC because of the governor and data logging. The CC was a good choice, it has been flawless so far. I like being able to set it up and download data with my laptop.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 01:47 AM  8 years agoPost 4
to-fast-to-new

rrNovice

Baltimore, md

My Posts: All  Forum  Topic

Thank you for the reply and the information you provided, the cc esc sounds like a good choice but I'm now about to buy the align 60amp esc. I just wanted to know if the TURNIGY esc would work well enough until I got the align, another question? What do you think about running a 15t pinion with this setup and batteries, do you think its too much or should I use a 13t pinion?

belt-cp / (3) exi 450v2 / (1) exi 450v2 cf / exi 500 cf-now trex 500 / trex 600efl pro

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 03:18 AM  8 years agoPost 5
jgunpilot

rrKey Veteran

Pollock, LA

My Posts: All  Forum  Topic

I believe I used a 13 tooth and it had plenty of RPM.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 03:39 AM  8 years agoPost 6
to-fast-to-new

rrNovice

Baltimore, md

My Posts: All  Forum  Topic

Once again, Thanks for the replies......

belt-cp / (3) exi 450v2 / (1) exi 450v2 cf / exi 500 cf-now trex 500 / trex 600efl pro

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1321 views POST REPLY
Helicopter
e-
Electric Motors-Controllers-ESC
Other › Turnigy Sentry 60a ESC
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Tuesday, January 23 - 4:14 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online