RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 545 views POST REPLY
HelicopterRadio - Futaba FASST › 10CHP gyro settings Problem
10-24-2009 01:14 PM  8 years agoPost 1
Stealth

rrNovice

Rio de Janeiro - Brazil

My Posts: All  Forum  Topic

I'm having hard time to set this thing up and would appreciate some help from you guys.

I set a 401 per the 10CHP manual and looks ok EXCEPT that when I give full collective up the gyro switches to Normal. On the other hand, when I give full collective down the gyro switches from Normal to Heading Hold.

I have all mixes inhibited and really do not know what's going on!!

There is a reference in the manual of some sort of "stick priority" which but the Futaba manual is so vague!!!

Regards,

Henrique

Trex250, 600ESP 4025-630 CC85HV 12S, E325 Cobra X9303 2.4

PM  EMAIL  Attn:RR  Quote
10-24-2009 01:41 PM  8 years agoPost 2
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

How do you know that at full up in goes to normal and at full neg it comes back to HH?

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-24-2009 05:11 PM  8 years agoPost 3
Stealth

rrNovice

Rio de Janeiro - Brazil

My Posts: All  Forum  Topic

by seeing the led at 401 (On HH, off Normal)

Trex250, 600ESP 4025-630 CC85HV 12S, E325 Cobra X9303 2.4

PM  EMAIL  Attn:RR  Quote
10-24-2009 05:24 PM  8 years agoPost 4
greenboot

rrVeteran

Marblehead, OH

My Posts: All  Forum  Topic

Have you looked at the "Servo" output screen? You should see the gyro gain change when you flip your gyro switch. Also watch the throttle and pitch as you move the collective. See if anything weird is going on there.

Tom

PM  EMAIL  Attn:RR  Quote
10-24-2009 10:53 PM  8 years agoPost 5
Stealth

rrNovice

Rio de Janeiro - Brazil

My Posts: All  Forum  Topic

I just checked and even though there is nothing unusual (ch 5 output does not change) when the collective stick hits the endpoint of its travel the gyro led changes from lit to off.

Trex250, 600ESP 4025-630 CC85HV 12S, E325 Cobra X9303 2.4

PM  EMAIL  Attn:RR  Quote
10-25-2009 12:11 AM  8 years agoPost 6
Thomas L Erb

rrKey Veteran

Alliance ohio

My Posts: All  Forum  Topic

check the rudder channel in the servo screen also. Then just to check something add some - expo ( 20-30%or more) to the rudder channel and see if your problem changes. Tom

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 545 views POST REPLY
HelicopterRadio - Futaba FASST › 10CHP gyro settings Problem
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, April 20 - 6:15 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online