RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 545 views POST REPLY
HelicopterRadio - Servo - Gyro - Gov - Batt › Futaba GY401 and Hitech HS-6965HB - 4.8V or 6?
10-23-2009 05:32 PM  8 years agoPost 1
julian46

rrNovice

Toronto, On, Canada

My Posts: All  Forum  Topic

does anyone have any advice on this?

I know the 6965HB servo supports 6V - just not sure about the 401
(running off an align regulator and 2C lipo)

thanks

PM  EMAIL  Attn:RR  Quote
10-23-2009 05:40 PM  8 years agoPost 2
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

The 401 is rated to 6 volts.

PM  EMAIL  Attn:RR  Quote
10-23-2009 06:39 PM  8 years agoPost 3
philthewrench

rrApprentice

Westchester Co. NY

My Posts: All  Forum  Topic

100+ flights on mine. No problem

Phil

... and now my impression of a lawn dart .......

PM  EMAIL  GALLERY  Attn:RR  Quote
10-24-2009 04:22 PM  8 years agoPost 4
julian46

rrNovice

Toronto, On, Canada

My Posts: All  Forum  Topic

running 6V - seems ok

PM  EMAIL  Attn:RR  Quote
10-25-2009 06:25 AM  8 years agoPost 5
jschenck

rrProfessor

La Vista, NE.

My Posts: All  Forum  Topic

currently running an HS6965 on straight A123 with a GY520. I would not be concerned about the 401 handling higher voltage. I've run 401's on regulated 6V but haven't tried them higher, I would do it though if I had the right servo like the 6965

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2009 02:22 PM  8 years agoPost 6
steve 01

rrProfessor

Grand Rapids MI

My Posts: All  Forum  Topic

I have been running it on 6 volts for a few years never a problem

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 545 views POST REPLY
HelicopterRadio - Servo - Gyro - Gov - Batt › Futaba GY401 and Hitech HS-6965HB - 4.8V or 6?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, January 20 - 11:26 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online