RunRyder RC
 6  Topic Subscribe
WATCH
 1 page 614 views
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Does Vibe90SG tail fit Vibe903D
10-22-2009 05:09 PM  8 years agoPost 1
Itsindilas

rrVeteran

Greece-Athens

My Posts: All  Forum  Topic

Guys,

I would like to be informed if the Vibe90SG complete tail set can replace the Vibe903d tail.

Cheers

PM  EMAIL  GALLERY  Attn:RR
10-22-2009 05:42 PM  8 years agoPost 2
dyoo

rrApprentice

Northern NJ

My Posts: All  Forum  Topic

I think you can put it. Because VIBE90SG tail is the same and little bigger than Vibe50 tail. I am using a Vibe50 tail gear box in my Vibe90 3D.

PM  EMAIL  Attn:RR
10-22-2009 05:47 PM  8 years agoPost 3
atvracer

rrVeteran

Transplanted to Oklahoma

My Posts: All  Forum  Topic

not sure about the SG but i did a 700n tail gearbox to the vibe90 it's a lot cheaper and just a little work

PM  EMAIL  GALLERY  Attn:RR
10-22-2009 06:24 PM  8 years agoPost 4
dyoo

rrApprentice

Northern NJ

My Posts: All  Forum  Topic

The tail shaft on Vibe90 SG is thicker than VIBE50/90 3D. So, I used the Vibe50 tail. The price is going to be about the same I think to do it because I kept parts from the tail hub to tail blades grips.

PM  EMAIL  Attn:RR
10-23-2009 12:39 AM  8 years agoPost 5
JR-ric

rrVeteran

newport news VA

My Posts: All  Forum  Topic

i also use the vibe 50 tail on my vibe 3d works great

Ricardo Maldonado
Team Curtis Youngblood Enterprise

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 12:49 AM  8 years agoPost 6
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

Is the vibe 50 tail box pretty much plug and play? Or do you have to do any modifications besides transferring the hub and grips??

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 12:53 AM  8 years agoPost 7
JR-ric

rrVeteran

newport news VA

My Posts: All  Forum  Topic

only thing i done was trimed the torq tube down a little so i can fit the drive shaft joint from the vibe 50 inside with out it sticking out to much...and once you get that done you side the tail box in..line it up and drill a little hole for the top screw on the tail box to be secure in the boom and thats it

Ricardo Maldonado
Team Curtis Youngblood Enterprise

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 12:54 AM  8 years agoPost 8
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

Nice and the gearing is all the same for the output?

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 12:56 AM  8 years agoPost 9
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

Oh and will the vibe 90SG tail fin mount to the vibe 50 tail case?

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 12:56 AM  8 years agoPost 10
JR-ric

rrVeteran

newport news VA

My Posts: All  Forum  Topic

i have not changed the gears and she is working fine..

http://runryder.com/helicopter/t446787p1/ this is why i did that mode

Ricardo Maldonado
Team Curtis Youngblood Enterprise

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 01:06 AM  8 years agoPost 11
atvracer

rrVeteran

Transplanted to Oklahoma

My Posts: All  Forum  Topic

http://runryder.com/helicopter/t446787p1/ this is why i did that mode
the same thing happen me so i got A MM box works great but there no longer around and i needed more and the vibe 50 and sg wasn't out yet so i got a 700n box to play with

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 01:35 AM  8 years agoPost 12
JR-ric

rrVeteran

newport news VA

My Posts: All  Forum  Topic

the 700 box mode would be cheaper too

Ricardo Maldonado
Team Curtis Youngblood Enterprise

PM  EMAIL  GALLERY  Attn:RR
10-23-2009 07:14 AM  8 years agoPost 13
Gorgin4325

rrKey Veteran

Florida

My Posts: All  Forum  Topic

Oh and will the vibe 90SG tail fin mount to the vibe 50 tail case?
Yes.

Regards,
G

PM  EMAIL  GALLERY  Attn:RR
10-25-2009 07:46 AM  8 years agoPost 14
Itsindilas

rrVeteran

Greece-Athens

My Posts: All  Forum  Topic

Thank you guys

PM  EMAIL  GALLERY  Attn:RR
10-25-2009 06:08 PM  8 years agoPost 15
rocket_33

rrElite Veteran

Mount Pleasant, Michigan USA

My Posts: All  Forum  Topic

Vibe 50 tailbox on my Vigor/Vibe 90. It is my competition heli and the tail is beautiful. Was not tough to do the modification the hardest part was finding a torque tube since you need a longer one and I did not want to splice a tube together. Found it, use the JR Vibe/Vigor front coupler and the Vibe 50 rear coupler. No problem

PM  EMAIL  GALLERY  Attn:RR
10-26-2009 11:01 AM  8 years agoPost 16
Dynamite

rrApprentice

Odessa

My Posts: All  Forum  Topic

Someone should prepare a DIY document for this mod.

JR Vibe 90 , Sylphide 90 C , JR Vibe 50 , JR AS 50 , T-rex SE V2 , Raptor 50 Titan

PM  EMAIL  GALLERY  Attn:RR
10-26-2009 03:57 PM  8 years agoPost 17
Itsindilas

rrVeteran

Greece-Athens

My Posts: All  Forum  Topic

Atvracer has some nice photos in his gallery.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 614 views
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Does Vibe90SG tail fit Vibe903D
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Tuesday, January 16 - 1:34 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online