I'm about 90% finish with the Vbar conversion of my HC500. It should be ready by tomorrow. I'm just waiting for a couple links and have to tidy up the wiring a bit. I have the Vbar all setup using the Trex 500 preset.
This is my first FBL heli and first time using Vbar. I made sure all sensors are moving in the right direction. And all radio commands seem to be working correctly. I used the spartan metal plate and foam tape to secure the sensor againt vibrations. And i also extended the balls on the swash a little for better resolution. 4.0 was a breezr to setup..
I just wanna make sure i didnt miss any important steps. So any tips please post em. Thanks !
If the maiden goes well, i should have my Logo 500SE ready be next week.
Heres some pics, please let me know if you see anything wrong with the heli setup. Im very happy with the HC 500 and RJX head. Airframe is super light. I haven't had a chance to weigh it though. Flight time and power should be interesting...
Heres my setup:
HC 500 CF
Scorpion 3026 1210 KV
ACE BLC 75 amp BEC
Futaba S9650 x3
Futaba S9257 Tail
Logo 600sx, Logo 690sx