RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 2320 views POST REPLY
10-21-2009 01:09 PM  8 years agoPost 1
MattHarper

rrApprentice

Lancashire, UK

My Posts: All  Forum  Topic

Does anyone know if the onboard starte will fit in the Benzin Trainer or is it only for use when the mechanics are installed in a scale fuselage ?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-21-2009 04:00 PM  8 years agoPost 2
dazzaster

rrKey Veteran

right next door to hell

My Posts: All  Forum  Topic

ive just installed one on a trainer however its very close to the servo rods which was resolved by bending them up slightly in the middle to bridge over the motor.
this was just to set up the model i have now got the airstar int frames which allow the servo to be installed on the side frames which work better and allow me to get a more scale apearance in the bell47 and at the same time keep the eletric start

A.K.A 509

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-21-2009 09:17 PM  8 years agoPost 3
MattHarper

rrApprentice

Lancashire, UK

My Posts: All  Forum  Topic

Thanks dazzaster, for the clarification. Flicking through the catalogue this morning it dawned on me that it probably wouldn't fit easily, if at all. I thought I'd ask the question before buying.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-21-2009 11:39 PM  8 years agoPost 4
Wemo

rrApprentice

Hampton Roads, VA

My Posts: All  Forum  Topic

It fit in mine very well. My pics in my Vario gallery section proves it worked and still works nicely, even in my huey. I would recommend to use a Brushless system.

"How high do they go? Are those things hard too fly? How much do they cost?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-22-2009 02:30 PM  8 years agoPost 5
dazzaster

rrKey Veteran

right next door to hell

My Posts: All  Forum  Topic

also to add i use a 3 cell 350mah evo lipo pack to run it as it gives a better start compared to nimh that vario recomend. however be carefull to ensure you give it short burst when starting

A.K.A 509

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-22-2009 11:17 PM  8 years agoPost 6
Wemo

rrApprentice

Hampton Roads, VA

My Posts: All  Forum  Topic

Yes...I would concur..I have 14.8V on 1600Mah for mine with my Brushless with only 60% power. DO NOT do 100%. good luck.

"How high do they go? Are those things hard too fly? How much do they cost?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-24-2009 02:28 PM  8 years agoPost 7
HELIPIL0T

rrNovice

UK

My Posts: All  Forum  Topic

The electric start fits okay in the Benzin trainer have had one fitted for two years prior to selling the model not long ago. The only comment i can make is to ensure the main bearing is kept well lubricated other than that 100% reliable.

PM  EMAIL  Attn:RR  Quote
10-24-2009 06:48 PM  8 years agoPost 8
Grocer

rrNovice

Richmond,Maine

My Posts: All  Forum  Topic

what brushless motor do you use on your onboard starter?
Thanks,
Harry

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2320 views POST REPLY
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Monday, January 22 - 6:24 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online