RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 501 views POST REPLY
Helicopter
e-
Mikado
Logo 400 › logo 10 to 400
10-20-2009 07:57 PM  8 years agoPost 1
shihan

rrApprentice

Oneida, N.Y.

My Posts: All  Forum  Topic

in converting a logo 10 to a 400 can I use thr motor that im using on the ten.
are there any advantages to th e 400 vs the 10.? thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2009 08:50 PM  8 years agoPost 2
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

logo 400
You do know that the logo 10 is the same thing as the logo 400 right?

the only difference is the canopy and the length of the boom.

the flybarless 400's have shorter main shafts also I think..

as far as using the motor you want...it depends...you will want anywhere from 2600-3000rpms on the head for the logo 400 spinning 425's -430's...if you cannot generate that type of headspeed then no....BUT...it is better that you look for a smaller motor anyways...like the Scorpion 3026's ...

I'm not sure there is any real "benefit" of going smaller...it just going to be smaller...

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2009 10:35 PM  8 years agoPost 3
ozace

rrKey Veteran

melbourne, australia

My Posts: All  Forum  Topic

There are many subtle small differences between the 400 and 10.
The frames are different, battery tray, landing skids, canopy, boom, belt, tail pushrod off the top of my head.

I have done one and it really wasnt worth the effort, i should have just purchased a new L400 kit.

we can never have too many, can we ?

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 501 views POST REPLY
Helicopter
e-
Mikado
Logo 400 › logo 10 to 400
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, April 25 - 8:59 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online