RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 408 views POST REPLY
HelicopterAerial Photography and Video › Logo 400 Frames
10-19-2009 08:35 PM  8 years agoPost 1
BULLSEYE

rrApprentice

Texas

My Posts: All  Forum  Topic

I was wondering, are the Logo 400 and Logo 10 frames identical? If not, what is different? Are the bolt locations the same? What about the width? I am trying to get a custom camera front mount made. The gentleman building the front mount has a Logo 10 and I have a Logo 400.

Thanks,

Joe

PM  EMAIL  Attn:RR  Quote
10-19-2009 08:52 PM  8 years agoPost 2
fire_boy92

rrApprentice

houston TX

My Posts: All  Forum  Topic

I put down my logo 10 a while back and ordered the Logo 400 frames to repair it. I compared these side frames and I could not find anything different. I didnt compare the width but if it would have been different my bearing blocks wouldnt have fit right and they did. There may be some very small variations somewhere but I couldnt tell you any. Let me know if I can help any more. I have an old frame, Wednesday I could take a side by side pic if you need it. I dont think you will have a problem though.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 09:20 PM  8 years agoPost 3
fergus

rrKey Veteran

Ireland

My Posts: All  Forum  Topic

The only difference I have heard of between the two is the gyro platform. I think you should be fine. You could always email Mikado to check.

Regards

Fergus

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 10:43 PM  8 years agoPost 4
fire_boy92rrApprentice - houston TX - My Posts: All  Forum  Topic

Gyro platform? Is that the part where I have my RX mounted? Im not 100% sure if that area was different. here are 2 of the best pics I have with me today, the first one is the original logo 10 frames, the second is the logo 400 with the addition of the batt. extender on the front.


PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 10:56 PM  8 years agoPost 5
fergus

rrKey Veteran

Ireland

My Posts: All  Forum  Topic

The platform is above the rear undercarriage bow. On the 400 both frames now meet at that location and provide a platform for the vbar sensor which is perpendicular to the main shaft.

Regards

Fergus

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2009 12:35 AM  8 years agoPost 6
BULLSEYE

rrApprentice

Texas

My Posts: All  Forum  Topic

Thanks for the responses.

fire_boy92, thanks for taking the time to post some pics!

PM  EMAIL  Attn:RR  Quote
10-20-2009 01:21 AM  8 years agoPost 7
fire_boy92

rrApprentice

houston TX

My Posts: All  Forum  Topic

No Problem, Im working till 7am Wednesday.... If you needs some more pics or particular shots of a certain area let me know what you need and I will post them on Wednesday.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 408 views POST REPLY
HelicopterAerial Photography and Video › Logo 400 Frames
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, January 21 - 4:45 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online