RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 654 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 500 › GY520 - Tail rebound
09-07-2009 05:43 AM  8 years agoPost 1
M100

rrNovice

Hong Kong

My Posts: All  Forum  Topic

Just install the GY520 with 9257 on my T500 but the tail rebound before stop when fast move the tail left/right. Can nayone tell me how to solve this? Do i need to buy the USB interface?

PM  EMAIL  Attn:RR  Quote
09-07-2009 05:52 AM  8 years agoPost 2
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

What are your gyro settings? How much gain do you have? And yes with a usb interface you can tweek with delays for stoping.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 05:59 AM  8 years agoPost 3
M100

rrNovice

Hong Kong

My Posts: All  Forum  Topic

My Gyro setup is as follows:

Gain: 40%
Mode: 3D
ATV: 100% both sides

There is no hunting when hovering, roll, flip etc.

PM  EMAIL  Attn:RR  Quote
09-07-2009 07:37 AM  8 years agoPost 4
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

Lower your gain to 32. Try that out if it doesn't help then you will have to mess with the usb programmer.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 08:28 AM  8 years agoPost 5
M100

rrNovice

Hong Kong

My Posts: All  Forum  Topic

Thank you for your advise. But I don't understand that the manufacturer's pre-set value should be suitable for general use, right? As my T500's setup is common and standard (stock motor and ESC, 9257 servos etc.), so what wrong with my setup? Is that related to the headspeed, tail blade size etc.? This did not happen in my GY401 that I used in T500 before.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 654 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 500 › GY520 - Tail rebound
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, October 19 - 10:10 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online