RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1069 views
HelicopterSynergy R/CSynergy N9 › GY520 and the Synergy N9
09-04-2009 11:10 PM  8 years agoPost 1
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

What are you guys runng as far as you set up with the 520? I have the programer and just installed it on my N9. Thanks Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2009 11:12 PM  8 years agoPost 2
Anthony.L

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

My advice from owning several GY520's (althought not on a N9) is don't get carried away with the USB programmer yet. The default serttings out of the box actually work extremely well. Set your gyro direction, gyro endpoints, and give it a shot in the air! Programming via the LED is very fast and simple.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2009 11:33 PM  8 years agoPost 3
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

I did not mean to say i wanted to change ever setting. I just wanted to know what guys are using so they did not strip ther crown gear. I used the 520 on my 600N and it was awsome and i am looking forward to using it on the N9.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2009 12:30 AM  8 years agoPost 4
ssmith512

rrKey Veteran

Indianapolis, IN USA

My Posts: All  Forum  Topic

I run mine with every setting at to "9" - to match the N9 theme.

Steve

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2009 02:30 AM  8 years agoPost 5
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

What dose that do?

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2009 02:38 AM  8 years agoPost 6
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

The question is, how do you add delay into the GY520?

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2009 02:48 AM  8 years agoPost 7
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

The question is, how do you add delay into the GY520?
I beleive you add it by using the control response. I moved mine from 7 to 9 wich will have a delay with stick movement.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2009 09:53 PM  8 years agoPost 8
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

My advice from owning several GY520's (althought not on a N9) is don't get carried away with the USB programmer yet. The default serttings out of the box actually work extremely well. Set your gyro direction, gyro endpoints, and give it a shot in the air!
Did that, But Moved the delay to 9. Well by by crown gear! Move the delay to 15 in and out. New crown gear doing well. Yes my crown gear was tight.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2009 12:49 AM  8 years agoPost 9
getfurious

rrVeteran

Exeter, NH

My Posts: All  Forum  Topic

After I stripped out a few tail gears on my 700. I went and talked to an Futaba Rep in the tent at IRCHA. He told me that I should not run "3D" mode ever.. only "F3C." The reason is that it is way too hard on the tail no matter what settings you used. So far I have not stripped any tail gears in F3C.

The Synergy is the next on the list for the 520.

Paul

A skilled pilot without flight discipline is a walking time bomb.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2009 01:43 AM  8 years agoPost 10
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

I got mine to work in 3D I have t move the delays to 15. I will try F3C. The funny thing is i asked Boddy Watts and Botos what there settings were. They really did not know. I will move mine to F3C and give it a go. Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2009 06:38 AM  8 years agoPost 11
spdntckt

rrApprentice

San Jose, CA USA

My Posts: All  Forum  Topic

FWIW.. i found that on mine i had a small drift which i could not get rid of until i rotated the 520 90deg... For some reason that did the trick..

So if anyone has found this to be a problem you might want to give it a try..

PM  EMAIL  GALLERY  Attn:RR  Quote
07-14-2010 08:22 PM  7 years agoPost 12
Maikko

rrNovice

Finland

My Posts: All  Forum  Topic

Hello,

Are there any updates on the settings what people are running with N9 and 520. I am starting my own journey, so comments are welcome.

Problems without PC interface:
I installed 520 to my N9 (previously Futaba 611). First I did not have CIU-2 so I used stick programming. I set the control responsy to slow so that I would not tear the Crown gear. Mode was F3C. Anyway I managed to strip one gear. Mesh was tight and it worked long time with my old 611. Then I also had bounce back from left piro. Another thing I noticed was that pirouetting speed was difficult to control. For example in piroflip if I took 5% away from max left rudder pirouetting speed dropped to half. I am planning to do some reverse piro's so I would not like to spend any more money on Crown gears and I want to use my 105 tail blades.

Setting with PC interface:
Ok, so I ordered the CIU-2 and now I am sitting in front of my computer making changes. These are what I am planning to test now:

Flight mode: F3C
Mode: Slow --> Standard (I had tail drift in sideways loops)
Control Response: Right 7, Left 7 --> 10 (to get rid of that bounce back)
AVCS Response: 7 --> 15 (based on this thread so that gear would hold up)
Pirouette Consistency: 7 --> 10 (to make it follow better stick movement)
AVCS Exp: 1 (I want to use radio expo only)
YAW rate: 100 (no change)
Gain: 40 (no change)
Range: 300 (no change)
D Gain: 150 (no change, not really understanding this)
D Damp: 40 (no change, not really understanding this)
Base Gain: 50 --> 65 (My Dx7 gain is now 90 without tail wag so higher gain could be usefull)

Comments?

-

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1069 views
HelicopterSynergy R/CSynergy N9 › GY520 and the Synergy N9
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Wednesday, December 13 - 9:13 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online