RunRyder RC
 8  Topic Subscribe
WATCH
 1 page 1248 views TOPIC CLOSED
Scorpion Power Scorpion Power
09-04-2009 06:27 PM  8 years agoPost 1
RACER7696

rrApprentice

Ma

My Posts: All  Forum  Topic

Guys do you use servo plates with the srews ? Or do you just use the rubber gromets with the brass eyelets. and if you do use servo plates do you use the brass eyelets or not. Picked up one usued so not quite shure.
Thanks,Mark

PM  EMAIL  GALLERY  Attn:RR
09-04-2009 06:44 PM  8 years agoPost 2
Deftone45075

rrApprentice

Hawthorne, NJ

My Posts: All  Forum  Topic

I used the servo plates without the metal eyelets.

PM  EMAIL  GALLERY  Attn:RR
09-04-2009 07:20 PM  8 years agoPost 3
Justin Barry

rrApprentice

Prescott Arizona

My Posts: All  Forum  Topic

I am using just the rubber gromets with the brass eyelets.



Team Avant
Canopy Works
Edge Blades

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-04-2009 08:26 PM  8 years agoPost 4
petmotel

rrKey Veteran

DeKalb, IL.

My Posts: All  Forum  Topic

I use the grommets, eyelets and plates. The eyelets are useful IMHO as stops for the screws so the grommets aren't over compressed.

Jay

PM  EMAIL  HOMEPAGE  Attn:RR
09-04-2009 08:40 PM  8 years agoPost 5
Jason Bell

rrElite Veteran

California

My Posts: All  Forum  Topic

Using plates, screws, and eyelets on all of my Auroras with no problems.

AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus

PM  EMAIL  GALLERY  Attn:RR
09-04-2009 09:01 PM  8 years agoPost 6
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

When i put mine to gether i found the servo's that mount inside the frames will make contact with the frame itself.The reinforcement between the holes on the top of the mount hits the frame before the servo gets tight.I ended up filing a notch in the frame for the tab to clear the frame. The ones on the outside of the frame are ok.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR
09-04-2009 09:42 PM  8 years agoPost 7
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

My servos are mounted only with the brass eyelets, screws, and the included washers.

I don't see the point in using eyelets AND servo plates.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR
09-06-2009 09:00 AM  8 years agoPost 8
Blax1

rrVeteran

Sydney Australia

My Posts: All  Forum  Topic

DS8717, Have you actually looked at the photo's you posted?

Nice try, but man please sort the focus out............

Screw's, brass eyelets and washers for me, worked fine.

PM  EMAIL  GALLERY  Attn:RR
09-06-2009 09:44 AM  8 years agoPost 9
SunRed

rrNovice

Denmark

My Posts: All  Forum  Topic

+1 for me

(and a drop of Loctite)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-06-2009 10:56 AM  8 years agoPost 10
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

DS8717, Have you actually looked at the photo's you posted?

Nice try, but man please sort the focus out............
Use your imagination. Buy the way Agusto is now making the frames for the E Aurora and Nitro Aurora with the mods i did.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR
09-06-2009 07:20 PM  8 years agoPost 11
Jason Bell

rrElite Veteran

California

My Posts: All  Forum  Topic

These are the pictures Augusto sent me of the new servo holes that DS8717 is talking about with the modifications. Thanks for the input!

AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus

PM  EMAIL  GALLERY  Attn:RR
10-08-2009 07:21 PM  8 years agoPost 12
Justin Stuart (RIP)

rrMaster

Plano, Texas

My Posts: All  Forum  Topic

Buy the way Agusto is now making the frames for the E Aurora and Nitro Aurora with the mods i did.
He's actually making frames for the E Aurora? Or he's just planning on making frames some day soon?

Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives

PM  EMAIL  GALLERY  Attn:RR
10-08-2009 08:14 PM  8 years agoPost 13
Jason Bell

rrElite Veteran

California

My Posts: All  Forum  Topic

He's actually making frames for the E Aurora? Or he's just planning on making frames some day soon?
The newest set of frames, that accommodate the newer TP 45C 5000 mah packs have the cut outs made. Its hard to see in this picture, but if you know what to look for you can see the ever so small cut out

AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus

PM  EMAIL  GALLERY  Attn:RR
10-08-2009 08:31 PM  8 years agoPost 14
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

It's easier to see in the 1st picture you posted. IMO.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR
10-08-2009 09:36 PM  8 years agoPost 15
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

Also these cut outs wernt big enough,he had to make them longer.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1248 views TOPIC CLOSED
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Monday, October 23 - 4:26 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online