Can someone tell me if the Curtis mp5 fits the 600N without having to trim the canopy?

Mine has OS50 with MP5 and didn't trim canopy here.

Been there done that and it fits purdy good!

No you don't have to trim the canopy however, I did have to trip the bottom carbon fiber brace just a little bit but it didn't weaken it at all.

It's a complex, costly, glow powered anti-gravity machine!

Thanks guys. Is there an easy way to attach a header tank to this heli?

Is there an easy way to attach a header tank to this heli?

i have used two holes.. either the front screw of the two at the rear skid below the tank (invert the header tank mount) or one of the screw from the lower bearing mount. both will require a spacer in between. if u r gonna use the lower bearing mount hole, put a washer in the frame since the original screw is a collar screw.

i have the mp5 sb on one of my 600n. had to shave the side of the bottom plate a bit where it touches the pipe.

Alees Rush 750

well guys i just bought a new MP5 SB and an O.S 55HZ motor for my new T-rex 600N pro. Cant wait to get her in the air!!! Are the kit supplied head dampers any good?

Oh one more question. The flybar seesaw has two holes, one is for stable 3D flight and the other is for nimble 3D flight!!! Which do you recommend to use?

I had no problems using the 3D setting. I had the basics down in forward flight and learned backwards and 3D on the 600 at that setting. Go for it with the 3D setting. You won't have to go back and adjust later.

JoJo
Foreseeing My Flybarless Future!

i just bought a new MP5 SB and an O.S 55HZ motor

I didn't realize the HZ was available yet, where did you get it?

Chris
X50, B320, Radix, Spartan
Titan,Kasama,MP5,Radix,JR770
Trex450SE,MavrikkG5,Phoenix35

cyberheli.com

I ordered mine!

I just ordered a 55HZ, express shipping was a must!

This is the only pipe made for the OS 55 and YS 56 http://www.readyheli.com/Hatori_SAB...os_p/sab-55.htm .

600LE,OS55,OS PowerBoost pipe,Align 610's,Spartan