RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 426 views
HelicopterAlignT-REX 600N › Align gov not governing...
09-03-2009 01:42 PM  8 years agoPost 1
kgoldie

rrNovice

Guelph, ON, Canada

My Posts: All  Forum  Topic

Hi guys,

I had the opportunity to be tached last night and boy was I disappointed. There were times in my flight where the head was getting up to 2400 rpm. Clearly, this is not good. My setup:

DX7 (100-80-100 throttle curve in idle-up)
Hitec 6965 on throttle
Align gov (in idle-up my ATV = 99% for roughly 2150 headspeed)
YS50ST
30% Curtis

I have two idle-ups set and no longer can hear a difference in headspeed when I switch between them (but I could before).

The light still turns off when the magnet passes under it. Is it possible for the sensor to have failed even though this test is working?

So does anyone have any ideas? Should I be upgrading my gov?

Thanks so much for your time.

Kyle

PM  EMAIL  Attn:RR  Quote
09-03-2009 01:58 PM  8 years agoPost 2
buzzsaw

rrElite Veteran

Southeast USA

My Posts: All  Forum  Topic

I had the same issue on original setup and some of my buds 700's aswell.What we did was went back and initialized the governor in each mode,1 first and 2 second of course and for some reason it worked.Now that being said,we did have to set the percentages in the transmitter gov menu before setup.They all seem to be working good and you can here the change.Also we are running 100 across in the throttle curves for 1 and 2.We are running 9303 2.4's,I am sure you can get it working with the DX7 aswell.Good luck!

Dave

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 426 views
HelicopterAlignT-REX 600N › Align gov not governing...
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, December 13 - 9:13 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online