RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 836 views POST REPLY
Scorpion Power Scorpion Power
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Adjusting the Vibe 50 Head
09-03-2009 04:26 AM  8 years agoPost 1
Big Electrics

rrApprentice

New Jersey

My Posts: All  Forum  Topic

Which hole does what?

Mixing arm inner & outer.

Washout arm inner & outer.

Thanks for you help.

I only need one!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 01:43 PM  8 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Did up the manual for the Avant programmable head. Also do a search on posts by Dr Ben he had a great thread on it a few weeks ago that went into tweaking rotor heads.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 02:26 PM  8 years agoPost 3
Big Electrics

rrApprentice

New Jersey

My Posts: All  Forum  Topic

BarracudaHockey

thanks for the info. I will take a look for DrBen's thread.

I only need one!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 02:31 PM  8 years agoPost 4
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

It tells you in the manual. For quicker the inner hole on the rod from the swash to the mixing arm,and the outer hole on the flybar rod to mixing arm.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 02:38 PM  8 years agoPost 5
Big Electrics

rrApprentice

New Jersey

My Posts: All  Forum  Topic

DS 8717

I looked through the manual last night but did not see this. I will have another look. I have the connecting rod of the mixing are in the outer hole. My question was more so on the swash arm. Right now the connecting rod is in the outer hole and was wondering if the inner hole would speed things up as you stated.

I only need one!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 03:01 PM  8 years agoPost 6
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

My bad,it doesnt tell you except which hole you should use.The closer you move the ball in on the mixing arm on the blade grip the more effective the flybar becomes and slows down response. I am using the Gforce arms on my vibe and it has an extra hole in the arm for the rod coming from the swashplate and the stock arm doesnt.Moving the ball in on the washout arm will make the flybar less effective so it should be faster.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2009 05:10 PM  8 years agoPost 7
JR-ric

rrVeteran

newport news VA

My Posts: All  Forum  Topic

i use the micro heli version and they also have the extra hole and is very affordable

http://www.horizonhobby.com/Product...rodID=MHEVI5083

Ricardo Maldonado
Team Curtis Youngblood Enterprise

PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2009 06:59 PM  8 years agoPost 8
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

The Gforce arm is angled down so the rod from the swashplate is 90 degrees to the rod.This gives you equal pos and neg pitch.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
09-09-2009 04:16 PM  8 years agoPost 9
JR-ric

rrVeteran

newport news VA

My Posts: All  Forum  Topic

The Gforce arm is angled down so the rod from the swashplate is 90 degrees to the rod.This gives you equal pos and neg pitch
the micro heli mix arms also has that spec....

iuts just like the g-force bt cheaper..

Ricardo Maldonado
Team Curtis Youngblood Enterprise

PM  EMAIL  GALLERY  Attn:RR  Quote
09-09-2009 04:34 PM  8 years agoPost 10
AzHyper

rrKey Veteran

Peoria, Az.

My Posts: All  Forum  Topic

Like Andy said, this is an excellent reference:
http://www.carbonxtreme.com/Product...tart_Manual.pdf

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 836 views POST REPLY
Scorpion Power Scorpion Power
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Adjusting the Vibe 50 Head
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, October 22 - 6:07 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online