RunRyder RC
 7  Topic Subscribe
WATCH
 1 page 2449 views POST REPLY
Scorpion Power Scorpion Power
HelicopterKasama Srimok 90 › Do Srimok servo "wheels" only fit JR and Futaba servos?
09-02-2009 03:27 AM  8 years agoPost 1
husafreak

rrKey Veteran

Livermore, NorCal

My Posts: All  Forum  Topic

I saw in the build thread that the Srimok has servo horns for JR or Futaba servos. Do these horns fit other brand servos as well? Hitec/Align/Ino Labs? I know that plastic horns can be jammed on and you think they will work but when you put a load on them they can slip (ask me how I know) but these are metal to metal, they have to be perfect. Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 03:44 AM  8 years agoPost 2
AltecLansing

rrElite Veteran

North Carolina

My Posts: All  Forum  Topic

I believe align and ace servos use futaba wheels and arms.

Man, I miss the eighties.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 09:49 AM  8 years agoPost 3
J3DI

rrVeteran

Oswestry, Shropshire. UK

My Posts: All  Forum  Topic

ace servos use futaba wheels and arms
+1 to confirm...

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 11:03 AM  8 years agoPost 4
Mercuriell

rrApprentice

Sunshine Coast, Queensland, Australia

My Posts: All  Forum  Topic

I have used the Futaba blue horns successfully on the ALign 610 servos - they are a bit tight and you have to pull them down onto the splines using the servo arm screw - removal requires a bit of careful levering with a ball link plier

John

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 03:46 PM  8 years agoPost 5
husafreak

rrKey Veteran

Livermore, NorCal

My Posts: All  Forum  Topic

Well, they may be a perfect match then, in my experience aluminum servo horns are usually a very tight fit on the servos they are designed for. Specifically, I am hoping to hear a yeah or neigh about the Hitec servos, no sense waiting on the new 8v heli servos if I can't use them anyway!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 07:36 AM  8 years agoPost 6
Hawken

rrNovice

Vic, Australia

My Posts: All  Forum  Topic

I believe the Hitec servos have a different spline to Futaba and JR

PM  EMAIL  Attn:RR  Quote
09-03-2009 07:51 AM  8 years agoPost 7
Git

rrVeteran

Brunei

My Posts: All  Forum  Topic

+1 hitecs are different

however, i believe that the aligns are sligthly bigger than the futabas and couldn't get them blue ones to go in 100% into my aligns 610s.

i found this on the quick uk aluminum wheels and single arm servo horns as well. once i forced them into the aligns, they wont fit into futaba nicely anymore. i experienced this during swapping my futabas to align and back again.

Alees Rush 750

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 10:24 PM  8 years agoPost 8
Mercuriell

rrApprentice

Sunshine Coast, Queensland, Australia

My Posts: All  Forum  Topic

Hitec servos output shafts are very slightly different from JR - in practice you do seem to be able to fit JR arms onto Hitec OP shafts

John

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 11:22 PM  8 years agoPost 9
bjacks

rrKey Veteran

Ft. Worth, Tex.

My Posts: All  Forum  Topic

Srimok

I would not use JR arms on Hitec servos, there not the same, when I race cars some of the guys would put JR arms on Hitec servos and after 4 or 5 races they would strip.(not the gears but output shaft)Bobby

PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2009 10:09 PM  8 years agoPost 10
J3DI

rrVeteran

Oswestry, Shropshire. UK

My Posts: All  Forum  Topic

Yes, i've also seen JR arms slip when used on Hitec Servos, they fit but not well enough.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-07-2009 06:20 AM  8 years agoPost 11
jameswilliam

rrApprentice

singapore

My Posts: All  Forum  Topic

How about using Savox servos anyone....?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2009 02:54 PM  8 years agoPost 12
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

My Posts: All  Forum  Topic

Oh..My srimok buddy is building..

I am a noob flyer from Singapore! Team Nitro Magic

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2009 11:13 PM  8 years agoPost 13
Adam Turner

rrNovice

England

My Posts: All  Forum  Topic

How about using Savox servos anyone....?
Savox are the same servo as the Align, just use the blue Futaba arms.

www.adsheli.com, KASAMA Team, V-blades, Spectrum, CSM

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-09-2009 02:23 AM  8 years agoPost 14
husafreak

rrKey Veteran

Livermore, NorCal

My Posts: All  Forum  Topic

I ended up getting JR 8717 and Futaba BLS servos. Plus an Align 610 for throttle.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2009 02:41 PM  8 years agoPost 15
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

Typically there are two splines Futaba ,JR . No matter what servo you are using either the blue or red will work .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2449 views POST REPLY
Scorpion Power Scorpion Power
HelicopterKasama Srimok 90 › Do Srimok servo "wheels" only fit JR and Futaba servos?
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Saturday, October 21 - 2:59 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online