RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 381 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › 9303 with ATG V2 HELP
08-31-2009 06:08 PM  8 years agoPost 1
kidd

rrNovice

Liuzhou-Guangxi -China

My Posts: All  Forum  Topic

Hi all,

I am trying to set up my JR radio 9303(10DS RX) with ATG V2. The gear channel is used for the ATG gain plug ,so I can have different RPM in normal 、idle1 and idle2 mode 。I want to used gear or another switch to turn on and off ATG in ANY flight mode。

How to do that?
Any help appreciated!

PM  EMAIL  Attn:RR  Quote
09-02-2009 02:17 PM  8 years agoPost 2
kidd

rrNovice

Liuzhou-Guangxi -China

My Posts: All  Forum  Topic

help help

PM  EMAIL  Attn:RR  Quote
09-02-2009 02:25 PM  8 years agoPost 3
rocket_33

rrElite Veteran

Mount Pleasant, Michigan USA

My Posts: All  Forum  Topic

With a 9303 I don't think you will be able to do that. The only way I can think of is to use a series of mixes that have a condition. I.e mix to set condition of mix 2 being active or in active and then mix 2 or perhaps a 3rd mix to set condition versus flight mode. This might be able to be done with a 12x but not sure with a 9303.

Good luck

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 02:52 PM  8 years agoPost 4
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

Why do you want to turn the gov off and on?

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 05:51 PM  8 years agoPost 5
kidd

rrNovice

Liuzhou-Guangxi -China

My Posts: All  Forum  Topic

just want to practicing without GOV sometime.

PM  EMAIL  Attn:RR  Quote
09-02-2009 05:58 PM  8 years agoPost 6
inkspot1967

rrProfessor

Cranston Ri

My Posts: All  Forum  Topic

there are 2 ways of doing it one using 3 mixes to be able to turn it off and on and the other set gear ch to gov in device menu on use the gov screen to set 3 dif head speeds in flight modes

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 07:06 PM  8 years agoPost 7
tadawson

rrElite Veteran

Lewisville, TX

My Posts: All  Forum  Topic

I have done this, albeit not on a 9303, but what you need to do should work fine on a 9303 or any decent radio. Since the ATG sets speed basically by distance away from the center channel position, if I recall correctly, what you need to do is define a mix that will mix the gear channel to itself, but negatively. IE, whenever the mix is on, the gear channel will center no matter where it was originally. Assign this new mix to the switch that you want to be gov on/off, and you are done . . . . really quite simple, and one of the things I really like about the way the ATG handles speed settings . . .

- Tim

Friends don't let friends become electrotarded . . . .

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 05:11 PM  8 years agoPost 8
kidd

rrNovice

Liuzhou-Guangxi -China

My Posts: All  Forum  Topic

Thanks a lot tadawson and Tim !But Tim ,I still have some confusition . You meen I just use Mixs 3 to mix gear ch to itself can turn the ATG on and off with the GEAR switch ? My English is not good .

PM  EMAIL  Attn:RR  Quote
09-03-2009 08:08 PM  8 years agoPost 9
Buzzin Brian

rrProfessor

College Station, Texas

My Posts: All  Forum  Topic

With any ATG if you have one side of the channel set to 0 (zero) the ATG will be off in that switch position. Meaning if you use the gear channel, do not use the governor function of the transmitter, and set one side of the gear channel ATV's to 0 (zero), in that switch postion the ATG will be off.

Brian

Build it, fly it, crash it. Repeat as often as needed.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 09:33 PM  8 years agoPost 10
tadawson

rrElite Veteran

Lewisville, TX

My Posts: All  Forum  Topic

You use whatever mechanism you want to set the speed - on my 10X, it's a curve coupled to the flight mode switch - you may well want to do something totally different. They you use a *SEPARATE* mix to mix the channel you are using for speed back to itself, with "-" set, so that whenever the mix is on, the value on that channel is zeroed, which turns the ATG off. It does not matter how you set the speed, and you don't need to waste a speed switch position for off - my way works completely independently of speed setting.

- Tim

Friends don't let friends become electrotarded . . . .

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 381 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › 9303 with ATG V2 HELP
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, October 19 - 11:03 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online