RunRyder RC
 15  Topic Subscribe
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 7116 views
Helicopter
e-
Mikado
Logo 500 › Logo 500 motors
09-05-2009 07:21 AM  8 years agoPost 41
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

Al, what heli will you be testing this motor in?

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2009 08:58 AM  8 years agoPost 42
Al Austria

rrElite Veteran

Gainesville, FL

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2009 06:23 AM  8 years agoPost 43
bstock

rrKey Veteran

Easton, MD.

My Posts: All  Forum  Topic

Al - have you had a chance to complete the testing between the Scorpion and the X-ERA 4020 motors?

Really curious to hear what you found out there!!!

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
09-19-2009 06:30 AM  8 years agoPost 44
CNCAddict

rrApprentice

Newport, N.C.

My Posts: All  Forum  Topic

Is anyone flying their motors yet (Shawn)?! I'm flying one in a Trex 600, but my flying skills are terrible, and there would be a conflict of interests somewhere in there

David B.
http://www.xeramotors.com

PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2009 07:25 AM  8 years agoPost 45
HeliMan Dave

rrVeteran

Suburban Chicago

My Posts: All  Forum  Topic

David,

A bearing in my Tonic-X Z30A-1110 has gone bad after 260 flights. Other than the bearing failure it has been decent. If you'd like to send me an X-ERA 4020-1000, I'll give you a comparison to the Z30A and Scorpion 4025-1100.

Logo 700 / 600 / 500 V-Bar NEO / Blade 180CFX / mCPX BL / Nano / V-Control

PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2009 07:54 AM  8 years agoPost 46
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

David, yes got it, waiting on my Jive 100LV to come back from Germany however as I sent it out to get the V7 in it, will let know once I got it all back up and running.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2009 11:13 AM  8 years agoPost 47
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Al - have you had a chance to complete the testing between the Scorpion and the X-ERA 4020 motors?
I have an Xera 4020-1100 coming for my Logo 500. I should have some flight reports soon

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-24-2009 09:21 PM  8 years agoPost 48
neverhappy

rrApprentice

Piedmont.Al. USA

My Posts: All  Forum  Topic

any updates to the motor comparisons?? Would like to see the out come.

I have a B50 15 L in my l10 that burn you if you touch it after hovering one pack of 5s2p 5000. Burned up a CC 60 amp and over heating a 80 amp CC.

Jeff

Jeffrey:) (Love and Peace to all)

PM  EMAIL  GALLERY  Attn:RR  Quote
11-01-2009 11:26 PM  8 years agoPost 49
bstock

rrKey Veteran

Easton, MD.

My Posts: All  Forum  Topic

Hi guys,

Any updates yet on comparisons of the Xera and the Scorpion motors?

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-02-2009 01:40 PM  8 years agoPost 50
roc

rrNovice

Hongkong

My Posts: All  Forum  Topic

hello

http://www.helifreak.com/showthread...&highlight=xera

see here,xera 4020--flied in trex600!!!

PM  EMAIL  Attn:RR  Quote
11-01-2010 05:46 PM  7 years agoPost 51
3Dmuse

rrApprentice

Ontario, Canada

My Posts: All  Forum  Topic

This thread is kinda old. Interesting that no one of the guys who were testing the Xera 4020-1000 reported back.

PM  EMAIL  Attn:RR  Quote
11-01-2010 09:33 PM  7 years agoPost 52
awjs

rrNovice

Coral Springs, FL USA

My Posts: All  Forum  Topic

http://www.readyheli.com/X-Era_c_4979.html

X-Era 4020-2Y 1000kV in my logo 500se with edge 550mm blades and its great motor... heavier than other motors like someone said in earlier post but this motor is better IMO... u be the judge after 5min 3d flight the motor temp's at 119 to 123... my other motors never temp at that so this motor IMO is a very good choice......

by the way my setup in case...

logo 500
jive 100lv
X-Era 4020-2Y 1000kV
550mm
92mm
bls451
bls251
vbar 5 pro full size
TP 5000mah 45c 6s

+12/-12

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-01-2010 10:34 PM  7 years agoPost 53
3Dmuse

rrApprentice

Ontario, Canada

My Posts: All  Forum  Topic

Thanks.

PM  EMAIL  Attn:RR  Quote
11-02-2010 09:32 PM  7 years agoPost 54
luixitoyo

rrApprentice

Lausanne - Switzerland

My Posts: All  Forum  Topic

Somebody is using 4020-1100 with 15t pinion and a Castle ESC?¿
Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 7116 views
Helicopter
e-
Mikado
Logo 500 › Logo 500 motors
 Print TOPIC  Make Suggestion 

 15  Topic Subscribe

Monday, December 18 - 12:45 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online