RunRyder RC
 7  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2196 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsOther › Blade stops with VBar
09-02-2009 06:23 PM  8 years agoPost 21
Flying Tivo

rrKey Veteran

Monterrey,NL,Mexico

My Posts: All  Forum  Topic

Delay

Helicuzz:

Do you use a governor??
If you do the delay will only work up to the activation point of the governor then it will rev up quite fast depending on the brand.

Unless you have no governor on Normal condition.

Felipe

If life throws at you lemons......Squirt some lemon juice in the eye of your enemy!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-02-2009 09:32 PM  8 years agoPost 22
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

I use a limiter so that's why I go down to normal mode to spool up slowly

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2009 03:11 AM  8 years agoPost 23
heli-cuzz

rrElite Veteran

Pittston, Pa. USA

My Posts: All  Forum  Topic

I also use a limiter.
TJ Revmax limiter on all my helis. The limiter engages at and above 25% throttle. It is active in all modes. I have the T-hold delay set at two seconds and it really works in every mode. I always fly in idle up with straight 100% t-curves so that throws the 25% rule out the door. It takes two seconds for it to come up to speed. I suggest trying it sometime.

Fury 55 NIB Furion6 CGY750 fbl helicopter-Frenzy CGY750 fbl nitro-Frenzy fbl NOBAR90

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2196 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsOther › Blade stops with VBar
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Tuesday, October 17 - 3:01 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online