RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1356 views POST REPLY
HelicopterFuel-Helicopters New or Limited ActivityAvant › GY611 setup for aurora with bls 251 and 14mz
08-09-2009 08:52 AM  8 years agoPost 1
1basejump

rrNovice

Ballymoney Northern Ireland

My Posts: All  Forum  Topic

I am having trouble setting the gyro for this heli and have only been able to enjoy flying in.... Normal mod.
Gear mesh is spot on engine running sweet, no foaming in the tank, still not got to grips with the dark art of the gy611.

any help apreciated.
Wil

Wil

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-09-2009 01:59 PM  8 years agoPost 2
Jafa

rrElite Veteran

Sydney, Australia

My Posts: All  Forum  Topic

There is no dark art to using a GY611

What exactly is the problem?
You can't get it into heading hold mode?
Within the Gyro function of the 14mz
set it to GY mode and select AVCS
then set the gain figure to 36


Protos | Logo 400 & 500 | Sceadu Evo | Freya Evo | Trex600N | Avant FX

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2009 12:13 AM  8 years agoPost 3
1basejump

rrNovice

Ballymoney Northern Ireland

My Posts: All  Forum  Topic

ok, I can get the gyro into heading hold mode but it hunts agressavely, could some one please give an example of the settings the are using:

1) gain
2) limits
3) delays start and stop

Wil

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-11-2009 12:34 AM  8 years agoPost 4
Deftone45075

rrApprentice

Hawthorne, NJ

My Posts: All  Forum  Topic

limits should be around 100 - 115, equal for right and left. gain on the futaba usually ends up between 37 and 40. start lmts at 10 and stop limis 40 to start.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-06-2009 11:40 AM  8 years agoPost 5
mastelios

rrNovice

Syros, Greece

My Posts: All  Forum  Topic

Hi, I have upgraded from a 401 to 611 and I think I am missing something.
mechanically the tail is fine,limits about 110%, delays 10% and 40% as suggested,and about 28G on the screen.My problem is that the tail after a pirouette does not hold,it wags a little when stopping,king like the gain tracking in the manual.Should I play with it?
The "Rudder Control Gain" does what?
The "AVCS Sense" ?
also the gain can be adjusted both from the transmitter and the gyro.which is best?if I have for example 70% on the transmitter and 55% on the gyro,witch one does it uses?
My heli is an ElyQ vision50.
Thank you.

PM  EMAIL  Attn:RR  Quote
10-06-2009 04:32 PM  8 years agoPost 6
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

The gain on the gyro is the last word, how you set it doesn't effect how it flys.

Shoot for something around 40 on the gyro in avc mode and see what happens.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
10-07-2009 08:15 AM  8 years agoPost 7
mastelios

rrNovice

Syros, Greece

My Posts: All  Forum  Topic

Thanks very much,so I will leave everything default and up the gain a little on my dx7, only problem is the windy weather here so I will be grounded for a couple of days...although it would be nice to know what the other settings do mean as the manual is not that thorough on describing these...

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1356 views POST REPLY
HelicopterFuel-Helicopters New or Limited ActivityAvant › GY611 setup for aurora with bls 251 and 14mz
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Sunday, April 22 - 5:34 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online