RunRyder RC
 6  Topic Subscribe
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2753 views POST REPLY
HelicopterFlybarless Rotor Head SystemsOther › RJX 90 head 12mm to 10mm reduction collar
06-07-2009 12:50 AM  8 years agoPost 1
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

I have seen that some guys have them but where can I buy one? Im planning on converting my vibe 90 3d to FBL and it uses a 10mm main shaft instead of 12.

This ad says he has one with it but he hasnt written me back yet.
http://runryder.com/helicopter/t516873p1/

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 01:54 AM  8 years agoPost 2
F1 Rocket

rrKey Veteran

Melbourne, Florida USA

My Posts: All  Forum  Topic

The reducer bushing is standard part available from Stock Drive Products. I have the part number at the shop and can look it up on Monday unless someone else has it.

Danny
Esprit Model

Danny - DemonAero Support Team

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 02:07 AM  8 years agoPost 3
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

rsimon123086
Pm sent

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 03:02 AM  8 years agoPost 4
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

That would be great if you could get me the part # I would really appreciate it.

Would I then just need to get the 10mm slider (from the RJX 50 head) associated with linking to the swash. Im not really sure what its called.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 03:28 AM  8 years agoPost 5
F1 Rocket

rrKey Veteran

Melbourne, Florida USA

My Posts: All  Forum  Topic

Would I then just need to get the 10mm slider (from the RJX 50 head) associated with linking to the swash. Im not really sure what its called.
The 10mm swash driver base is part # 1144-SD

Danny
Esprit Model

Danny - DemonAero Support Team

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 03:30 AM  8 years agoPost 6
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

Thanks, if I am not mistaken those are the only two parts I need right to make it work on my vibe right?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 05:04 AM  8 years agoPost 7
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

https://sdp-si.com/eStore/Direct.asp?GroupID=393
click on page 2

It looks like the only two options are a 22mm or 35mm length collars for the 12 to 10 reduction. Wouldnt happen to know off had would you?

I guess I could just get the 35mm and cut it down.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 08:23 AM  8 years agoPost 8
gorn

rrElite Veteran

Western Australia

My Posts: All  Forum  Topic

the RJX head is available in 10mm and 12mm shaft sizes. No nead for a collar.

For the love of the hobby

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-07-2009 03:38 PM  8 years agoPost 9
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

I can only seem to find the 12mm one with the places I have checked. Even the RJX website didnt have it listed. Do you have a link or know some place I can call?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 03:44 PM  8 years agoPost 10
gorn

rrElite Veteran

Western Australia

My Posts: All  Forum  Topic

the stock Xtreme 90 main shaft is 10mm, so the head they list specifically for the X90 is the one you need.
We sell them here in Oz, but unless your in Oz you cant buy it from us lol.
Contact RJX USA, they will have what you need

For the love of the hobby

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-07-2009 03:56 PM  8 years agoPost 11
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

I guess I will have to call them they dont have them listed on their online store either.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 04:04 PM  8 years agoPost 12
gorn

rrElite Veteran

Western Australia

My Posts: All  Forum  Topic

you have a PM

For the love of the hobby

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-07-2009 04:09 PM  8 years agoPost 13
gorn

rrElite Veteran

Western Australia

My Posts: All  Forum  Topic

here is a link to the RJX web page showing all the parts plus the complete head you need http://www.rjxhobby.com/Productlist...oducttypeID=206

For the love of the hobby

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-07-2009 07:18 PM  8 years agoPost 14
SMITHB72866

rrVeteran

FLORIDA

My Posts: All  Forum  Topic

Pm sent We have the Sleeve instock for the 12mm to 10mm

Bobby

RREmodels

PM  EMAIL  Attn:RR  Quote
06-08-2009 11:20 PM  8 years agoPost 15
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

I made a bunch of calls to RJX of USA and no answers

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2009 12:12 AM  8 years agoPost 16
SMITHB72866

rrVeteran

FLORIDA

My Posts: All  Forum  Topic

Pm Foxden on here he might be able to help you

RREmodels

PM  EMAIL  Attn:RR  Quote
06-12-2009 02:25 AM  8 years agoPost 17
nowellflying

rrApprentice

Sulphur, La

My Posts: All  Forum  Topic

RJX head
Here is the one I have on my T-Rex 700. It is a 10mm main shaft.
http://www.helidirect.com/trex700-f...bly-p-10191.hdx

Greg Nowell
Team Starwood Scale Models Field Rep

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-12-2009 02:30 AM  8 years agoPost 18
nowellflying

rrApprentice

Sulphur, La

My Posts: All  Forum  Topic

Wait
I might be wrong on that one. One place said 700n was 10mm and another saying 12mm. I need to check my heli I guess. Eather way you will like the RJX head. Robert, I should be at the field Saturday morning if you want to come see one . Talk to you later

Greg Nowell
Team Starwood Scale Models Field Rep

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-12-2009 02:35 AM  8 years agoPost 19
rsimon123086

rrApprentice

Beaumont TX

My Posts: All  Forum  Topic

I thought the t-rex 700 used a 12mm main shaft the same as the N9?

RJX makes a head for the 12mm and 10mm but the only place I could find that stocked the 10mm head was BF carbon in canada and over seas.

I remember looking at the head you put on it a while back looked pretty nice. Have you looked into doing this? http://runryder.com/helicopter/t520827p1/

Would you happen to know what size dampeners are in the RJX head?

The head and control unit should be in early next week so im going to try to have it all ready to go next weekend.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-12-2009 02:45 AM  8 years agoPost 20
nowellflying

rrApprentice

Sulphur, La

My Posts: All  Forum  Topic

RJX head
Yes I was wrong , Mine is 12mm like the n9. I have seen that about making the main shaft shorter but mine is fast using the stock 700n shaft. What head gyro did you go with. I'm running the SK360 and love it. Come out and fly if you can. Later

Greg Nowell
Team Starwood Scale Models Field Rep

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2753 views POST REPLY
HelicopterFlybarless Rotor Head SystemsOther › RJX 90 head 12mm to 10mm reduction collar
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Thursday, May 24 - 3:06 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online