RunRyder RC
 4  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1001 views POST REPLY
HelicopterBeginners Corner › Cant get equal range from low to high stick
06-07-2009 05:32 PM  8 years agoPost 21
Heli0228

rrApprentice

Ripplemead, Va

My Posts: All  Forum  Topic

Question
I have a mini Titan and I had the same problem so I just adjusted the atv so it worked out, but I did it in normal mode. Why do you do the set up in idle up 1 and not normal? I am using a 9303 2.4, but now I have a 12X 2.4 so does the radio matter? Also I have read in the swash mix section to NOT use the Expo it will cause the servos not to track if any subtrim is used (RC heli issue #30 December 2008 page 96.) does any one know why? The artical also says it happens to the Dx7, 9303, and 12x. I thought this may be why I could not get even throw from low to high on my mini titan I am using JR DS 285 servos.

PM  EMAIL  Attn:RR  Quote
06-07-2009 06:32 PM  8 years agoPost 22
MattJen

rrElite Veteran

UK

My Posts: All  Forum  Topic

Barracuda is correct,

Most setup in idle up, as this is max pitch range without any other mixes interefering, once you get your maximum range setup, i then go into normal and set up a more gentle curve as i dont like 0 in the middle unless i am doing aero's..

But in reading your posts it seems you have cracked it..

Matt

All The Best

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2009 04:39 AM  8 years agoPost 23
RCHSF

rrKey Veteran

NC

My Posts: All  Forum  Topic

Next time I have to go thru this I'll set up in Stunt 1, then do my N mode.

Thanks for all that replyed.

PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1001 views POST REPLY
HelicopterBeginners Corner › Cant get equal range from low to high stick
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Thursday, May 24 - 3:32 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online