RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 483 views POST REPLY
Helicopter
e-
Thunder Tiger
Raptor E325 › Getting the S3154 servo secured to the stock tail servo mount?
06-05-2009 02:48 AM  8 years agoPost 1
racin06

rrKey Veteran

Indianapolis, Indiana

My Posts: All  Forum  Topic

The mounting tabs on the S3154 seem the be too short; therefore, the holes on the tail servo mount and S3154 don't line up. Am I not seeing something correctly?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2009 04:12 AM  8 years agoPost 2
duff

rrApprentice

Calgary, Alberta, Canada

My Posts: All  Forum  Topic

I am not sure I follow your question however I had that servo mounted on my e325 with no issues before I upgraded.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2009 04:14 AM  8 years agoPost 3
RMG2

rrApprentice

Oregon, USA

My Posts: All  Forum  Topic

Racin, I've not read of anyone using a micro servo on the tail of the MT so maybe the mounts were not designed to accomodate a micro.

I would imagine you could make that 3154 work if you elongate the holes with your dremel.

.09sec. speed at 6V is a little slow for the tail compared to the .05-.07sec. most use but I guess the proof will be in the testing.

Good luck friend and glad to see you finally got around to building your MT kit that you have had for months!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-06-2009 08:20 AM  8 years agoPost 4
Tubeheadz

rrNovice

Chatham,IL

My Posts: All  Forum  Topic

They can be made to fit but I burned mine up because I didn't set the gain and delay to 0. I only used two screws and in the bottom two holes of the mount.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 483 views POST REPLY
Helicopter
e-
Thunder Tiger
Raptor E325 › Getting the S3154 servo secured to the stock tail servo mount?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, May 23 - 12:44 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online