RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1748 views POST REPLY
Helicopter
e-
Align
T-REX 450 › 450 Pro. Swashplate height?
06-02-2009 09:09 AM  8 years agoPost 1
Heavy weight

rrNovice

Kent.England

My Posts: All  Forum  Topic

I have set all the head links as per manual.But they differ in length slightly to the manual to get 0 degree`s at mid stick.All my servo`s are at 90 degree`s.
From the top of the bearing block to the bottom of the swash i have 10mm,does that sound about ok?

PM  EMAIL  Attn:RR  Quote
06-02-2009 09:15 AM  8 years agoPost 2
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

What is your high positive blade pitch and low negative blade pitch set at? If they are both the same, eg +12/-12 then your swash plate is fine where it is. If not then you need to adjust your push rods so they come out the same. Remember, the lengths they give you in the manual are just for reference, a starting point.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2009 10:04 AM  8 years agoPost 3
Heavy weight

rrNovice

Kent.England

My Posts: All  Forum  Topic

To be honest i have not checked pitch yet.
So i have to get +/- pitch the same?

PM  EMAIL  Attn:RR  Quote
06-02-2009 10:21 AM  8 years agoPost 4
duceduc

rrKey Veteran

Saitama-Ken, Japan

My Posts: All  Forum  Topic

It should match top and bottom. If not, you have a linkage that is too long or too short.

Duc S
Do It! Do It!™
AMA:REVOMIX
RCK:24005615-01

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1748 views POST REPLY
Helicopter
e-
Align
T-REX 450 › 450 Pro. Swashplate height?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, May 22 - 10:51 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online