RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1598 views
Scorpion Power Scorpion Power
Helicopter
e-
Thunder Tiger
Raptor E325 › TowerPro MG90 servo on MT???
03-22-2009 05:21 AM  8 years agoPost 1
Whopper Chopper

rrVeteran

Atlanta, GA

My Posts: All  Forum  Topic

Does anyone know if the TowerPro MG90 servo will fit on the MT? I just bought a MT SE and found a great deal on the MG90's. Need to know so I can move forward with the purchase..

Thanks.

MG90:

Weight: 14g
Dimension: 23mm x 12.2mm x 29mm
Stall torque: 2.2kg/cm(4.8V )2.5kg/cm(6V)
Operating speed: 0.11sec/60degree(4.8v), 0.10sec/60degree(6v)
Operating voltage: 4.8-6.0V

PM  EMAIL  Attn:RR  Quote
03-22-2009 08:42 AM  8 years agoPost 2
Rogerm069

rrApprentice

New Albany, PA USA

My Posts: All  Forum  Topic

The Hitec HS-65mg which is the prefered servo has to be fitted by dremeling and it measures 23.6 x 11.6 x 24mm, so probably have to do some fitting.

Growing old is mandatory, growing up is optional

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2009 12:30 PM  8 years agoPost 3
skippy7399

rrNovice

Sheboygan Falls, WI

My Posts: All  Forum  Topic

They fit on mine, a little tight on the elavator, but no problem.

Live large, fly scale!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-08-2009 09:39 PM  8 years agoPost 4
bugsb

rrVeteran

rothwell//northants​UK

My Posts: All  Forum  Topic

are the TowerPro MG90 servos any good
Ron

PM  EMAIL  Attn:RR  Quote
05-08-2009 10:50 PM  8 years agoPost 5
skippy7399

rrNovice

Sheboygan Falls, WI

My Posts: All  Forum  Topic

Towerpro mg90

Ron.

Their decent. Depends on type of flying you intend to do. They don't twitch or make noise, except of course the rudder, which I have an sg50 on.

W.C.

This your first mt build? Remember the swash moves down to pitch up, so you have to reverse the swash in your radio. Good luck. S

Live large, fly scale!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-09-2009 03:31 AM  8 years agoPost 6
rcpilotmike

rrApprentice

GroveCity, Ohio, USA

My Posts: All  Forum  Topic

W.C. just sold his MT to me. Great heli. He did install the tower pro servos on cyclic. They work great. I'm just getting into 3d stuff so I had a friend of mine put it through its paces this past week end to check my set up. He said it feels fine.
Probably if I had anything bad to say about these servos it would be this. The splines seem to be a little coarser then Hitech or Futaba. So getting a couple of the horns centered took a little more subtrim then I like to see. But as I said flies great.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-09-2009 10:17 PM  8 years agoPost 7
jamesppp

rrApprentice

carrollton georgia​usa

My Posts: All  Forum  Topic

I burned up 2 of them on a little Compy fixed pitch heli cyclic. Of course when each one died it was in the air

#:>)*.......................*(<:#

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1598 views
Scorpion Power Scorpion Power
Helicopter
e-
Thunder Tiger
Raptor E325 › TowerPro MG90 servo on MT???
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Saturday, November 25 - 12:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online