RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 479 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › Multigov pro setup
03-21-2009 05:41 PM  8 years agoPost 1
Helijockey

rrKey Veteran

150 miles from​somewhere

My Posts: All  Forum  Topic

I just got another MG pro but when I try to configure it keeps blinking rapidly with the engine off. Don't have mixture control so that can't be it, what's going on?

PM  EMAIL  Attn:RR  Quote
03-21-2009 06:48 PM  8 years agoPost 2
Aerospire

rrApprentice

Honolulu, HI

My Posts: All  Forum  Topic

A quick flashing on the bench means that you need to configure the unit (set gear ratio, speeds, and endpoints). You should hook up the LCD and see what it says when you turn it on.

bob

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2009 08:18 PM  8 years agoPost 3
chopper_crazy

rrElite Veteran

Delphos, Ohio

My Posts: All  Forum  Topic

yeah, what he said. Also, if you go to the "other" site, finless has several great videos on the multigov pro.

It's a complex, costly, glow powered anti-gravity machine!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2009 09:19 PM  8 years agoPost 4
Helijockey

rrKey Veteran

150 miles from​somewhere

My Posts: All  Forum  Topic

Thanks got it, the video from the "other" site was very helpful Only thing in the video in set idle/set high he gets a reading in the 90's for high whereas I get 74. Is that ok?

PM  EMAIL  Attn:RR  Quote
03-21-2009 09:22 PM  8 years agoPost 5
Helijockey

rrKey Veteran

150 miles from​somewhere

My Posts: All  Forum  Topic

Forgot to add the throttle trim was still at low when in set high.

PM  EMAIL  Attn:RR  Quote
03-21-2009 09:29 PM  8 years agoPost 6
Aerospire

rrApprentice

Honolulu, HI

My Posts: All  Forum  Topic

Everyone's radio setup will be a little different depending on the electronics and throttle linkage. As long as you make sure your throttle linkage doesn't bind and you get full travel on the throttle while going the right way, you should be ok.

After you do your radio+mechanical setup, program the endpoints using the "SET IDLE, HIGH" procedure.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2009 09:41 PM  8 years agoPost 7
Helijockey

rrKey Veteran

150 miles from​somewhere

My Posts: All  Forum  Topic

Thanks bob I just did

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 479 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › Multigov pro setup
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, November 18 - 1:01 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online