RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 877 views
Scorpion Power Scorpion Power
HelicopterComputer Flight SimulatorsOther › dx7 subtrim
03-21-2009 09:02 AM  8 years agoPost 1
Mundale

rrNovice

burton Mi USA

My Posts: All  Forum  Topic

does it have it for seprat channles or is it globle?

PM  EMAIL  Attn:RR  Quote
03-21-2009 09:13 AM  8 years agoPost 2
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

does it have it for seprat channles or is it globle?
Huh? What you talking about Willis? Each of the stick channels e.g. throttle, rudder, aileron, elevator each have their own external sub-trim buttons. Every channel has a sub-trim in the program section.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-21-2009 12:26 PM  8 years agoPost 3
Mundale

rrNovice

burton Mi USA

My Posts: All  Forum  Topic

lol its been a while iv been iraq cant fly but learn alot reading post and watching vids and i seen someone talking about being able to change subtrim in idle up mode with out it changing the subtrim in normal. its been awhile like i said but if i rember right i tried that and it change the subtrim in all of them idle up and in normal and so on so i didnt know if it was something his radio could do or if there was a setting i was missing

PM  EMAIL  Attn:RR  Quote
03-21-2009 01:32 PM  8 years agoPost 4
Avropilot

rrVeteran

Murfreesboro,​Tennessee

My Posts: All  Forum  Topic

Sub trims are global on the DX7. Regular trims are separate.

Waiting for parts

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2009 02:32 PM  8 years agoPost 5
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

edit: nevermind. That'll teach me to post within the first 5 minutes of waking up

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2009 03:23 PM  8 years agoPost 6
Mundale

rrNovice

burton Mi USA

My Posts: All  Forum  Topic

were not talking about alleron elveator but between flying modes as in if i set my subtrim up in normal mode when i flip it in idle up can i move my subtrim for elevator and not have it effect the subtrim that i have set for normal.

PM  EMAIL  Attn:RR  Quote
03-21-2009 03:31 PM  8 years agoPost 7
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

DOH!!!

I knew that. edited my post above. Sorry, avropilot.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2009 03:50 PM  8 years agoPost 8
Mundale

rrNovice

burton Mi USA

My Posts: All  Forum  Topic

lol we all have thos moments but thanks avro do u know what radios do have this

PM  EMAIL  Attn:RR  Quote
03-22-2009 03:04 AM  8 years agoPost 9
Avropilot

rrVeteran

Murfreesboro,​Tennessee

My Posts: All  Forum  Topic

I believe subtrims are global on all radios as far as I know. I use Jr equipment so I am not completely familiar with the others.

Waiting for parts

PM  EMAIL  GALLERY  Attn:RR  Quote
03-22-2009 02:40 PM  8 years agoPost 10
pH7

rrKey Veteran

Sterling Heights, MI​- USA

My Posts: All  Forum  Topic

I keep wondering if we have a terminology problem here.

Subtrim is set via the menus and controls the centering for the associated servo. It is global, it applies to that servo no matter what the flight mode or anything else. It only makes sense to have all sticks centered and all trims off before setting the subtrim. I have never used subtrim with any sim.

Trim is set via the small levers at the sides and bottoms of the sticks. On the DX7 the trims are per flight mode. So if you change in one flight mode it is likely, but not necessary, to change the other flight mode trims also. Again, I have never needed to mess with trim in the simulator.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 877 views
Scorpion Power Scorpion Power
HelicopterComputer Flight SimulatorsOther › dx7 subtrim
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, November 20 - 12:30 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online