RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 662 views
Scorpion Power Scorpion Power
03-20-2009 02:17 PM  8 years agoPost 1
torbjørn erikserrNovice - norway - My Posts: All  Forum  Topic

TREX 700 WHITH DUCRED FAN ON 9.6-1500MHA BATTERI
HAS HOVERD ON 30 MIN AND THE FAN ARE STILL GOING THE TEMP VAS 95 C
IT WORKS

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 02:59 PM  8 years agoPost 2
copperclad

rrElite Veteran

NY

My Posts: All  Forum  Topic

hi torbjørn erikse
very nice work , very innovative ideas , i notice your 700 has the main gears , tail drive and gas tank , out of a TT Raptor , i am guessing the boom and tailbox are Raptor also

i don't see a fan shroud in the photo , can you post more info on your conversion , thanks

PS: oops! , my bad , i see the electric fan now

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 03:13 PM  8 years agoPost 3
torbjørn erikse

rrNovice

norway

My Posts: All  Forum  Topic

trex 700 whith 260 puh and hirobo freia fanhub and raptor 90 bom
95 tot drew and syngery 15 tot pinion geir gering 6.43
trex 700 rotor head.
5mm aluminium botnplate 3mm sideplate.
raptor 90 cluts and clutsbell
ductedfan is working very vell to coll the engien
sorry for my bad english.
im from norway

torbjørn

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 03:20 PM  8 years agoPost 4
copperclad

rrElite Veteran

NY

My Posts: All  Forum  Topic

hi torbjørn

your enlish is much better than my Norwegian

you are doing a great job on your machine , i really like all the good ideas you have had to solve the problems with a conversion , it is looking like it will work out very well , thanks for posting , and please , keep us posted as to your progress , thanks again

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 05:53 PM  8 years agoPost 5
Fixit

rrElite Veteran

UK

My Posts: All  Forum  Topic

Now that’s a great idea, I’ve just checked and the Raptor tail boom holder fits in the 700 frames and the Main shafts are booth the same size so I could use the Raptor main gears along with the Raptor 14T pinion I have and solve any problems with the 700 gears stripping, shame I’ve just sold the Raptor 90 along with all the spares I had.
I’m wonder if the Raptor bevel gears will fit in the 700 tail boom holder.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-20-2009 07:40 PM  8 years agoPost 6
victor55ca

rrApprentice

Vancouver BC

My Posts: All  Forum  Topic

Now this is a frankien-Heli. The concept is good, the only thing you will need is a generator so you don't have to rely on the battery for the cooling system. I think you can extend the rear tail rotor shaft up and take power off that for a generator.

Vince

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 07:57 PM  8 years agoPost 7
torbjørn erikse

rrNovice

norway

My Posts: All  Forum  Topic

TREX 700

hei the bom holder dont fitt trex raptor 90 bom is 25mm and tres 22mm
us the raptor holder and the main sjaft holder is raptor 3 pises

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 08:00 PM  8 years agoPost 8
torbjørn erikse

rrNovice

norway

My Posts: All  Forum  Topic

the generator is a good ide

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 10:48 PM  8 years agoPost 9
Fixit

rrElite Veteran

UK

My Posts: All  Forum  Topic

hei the bom holder dont fitt trex raptor 90 bom is 25mm and tres 22mm
us the raptor holder and the main sjaft holder is raptor 3 pises
The 700 frame spacing is 60mm and the Raptor is 62mm so with 1mm shaved off each side of the Raptor tail boom mount posts I'm sure it will fit.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-21-2009 12:06 AM  8 years agoPost 10
torbjørn erikse

rrNovice

norway

My Posts: All  Forum  Topic

TREX 700

trex 61mm and raptor is 62 mm 0.5mm on the side clutsbell housing
the raptor 90 go raet inn

torbjørn

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 662 views
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, November 19 - 2:14 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online