RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 460 views
Scorpion Power Scorpion Power
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Is this binding ok because it cant happen in​flight???
03-20-2009 07:51 AM  8 years agoPost 1
cd5

rrApprentice

penrith,Australia

My Posts: All  Forum  Topic

am not sure if this is in the design of this heli but i think i have a binding issue but i dont know if it applies to flight. Does your v50 do the following
-Have the flybar parallel to the boom
-Give maximum positive pitch
-Give maximun forward elevator
-Now pull the flybar paddle to the boom
Do you get binding in the head link before the flybar seesaw bottoms out on theinside of the head block?
-Now if you hold the same stick position and tilt the flybar toward the canopy, the seesaw has full travel without binding, this is how it would move in flight,is it not?
Does this matter because in a situation where you are flying if you apply forward elevator the flybar will tilt towards the canopy ,not the boom anyway so this binding would never happen in the flight.

Is this the way things are meant to be and im worrying about nothing or do i have a problem.
Thanx

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 06:33 PM  8 years agoPost 2
Zaneman007

rrElite Veteran

Texas - USA

My Posts: All  Forum  Topic

I can't understand what you are doing?
And your profile doesn't help?

I take it your are trying to figure out if the links are binding.

But first off, do you know what the pitch is on your blades and paddles?

With the Vibe 50 you can get some serious pitch with no binding.

Anyway, To check for binding on the head:

With the Tx and Rx turned on, give the main blades a spin. Know with the throttle all the way down, take the cyclic stick to all four corners of the radio, and do the same with the throttle all the way up.

Now... Listen.... if the links are hitting anything, you will hear a click, and that would be bad news.

Old Guys Rule!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 07:28 PM  8 years agoPost 3
DS 8717

rrProfessor

Here wishing i was​somewhere else

My Posts: All  Forum  Topic

In that configuration since the flybar is over the boom and there is no ail input the flybar will be level.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
03-23-2009 02:43 AM  8 years agoPost 4
cd5

rrApprentice

penrith,Australia

My Posts: All  Forum  Topic

Since the fly bar will remain level i assume their is no risk of popping a link then?

FYI i am only running +-10 degrees of collective and 7 degrees of collective. In this config i have all but eliminated the bindind , but if i carry more pitch then i get the binding. I would obviously like to carry at least 11 and 8.

When i spin the blades and put in the stick inputs of full collective and full elevator their is no clicking.The issue only arises when i manually pull the flybar paddle down toward the boom with the above mentioned stick positions.

I would be interested to see if anyone else has this issue with the vibe or if i should not worry as the flybar will not go their in flight.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-23-2009 05:44 PM  8 years agoPost 5
Zaneman007

rrElite Veteran

Texas - USA

My Posts: All  Forum  Topic

I'm running 11.5 pitch(maybe more, it has been awhile) and 8 on the cyclic, no problems.

IMO - I'm not seeing the need for more than 10 on the pitch.

Old Guys Rule!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 460 views
Scorpion Power Scorpion Power
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Is this binding ok because it cant happen in​flight???
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, November 17 - 8:51 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online