RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 385 views
Scorpion Power Scorpion Power
03-20-2009 12:11 AM  8 years agoPost 1
zaw

rrKey Veteran

Lebanon, NH - USA

My Posts: All  Forum  Topic

HBK3 tail mod on HBK2 Metal..
well. wow, now tail is actually proper on the HBK2 and it actually slide 100% on the slider smoothly. Also installed Hyperion DS09 for as tail servo, need so work out some issues but seems to be holding good.

ಠ_ಠ HBK2 built with inexpensive parts! ٩๏̯͡๏)۶ Gaui425

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 12:44 AM  8 years agoPost 2
Gregor99

rrElite Veteran

Western Wa

My Posts: All  Forum  Topic

Yes, cheap and easy. Two parts and now you have modern tail design. But Esky did it again. Messed up on the length of the ball links to the blade grips. They are to long, which forces the slider too close to the tail box when setup in rate mode. All the slider arm travel and you are limited to about 2mm in one direction. Boo!

I think I'm going to file the flat spot on my shaft even with the indent so I can hang the hub out another couple mm on the shaft. That should help.

Revolectrix Beta Team

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2009 02:24 AM  8 years agoPost 3
zaw

rrKey Veteran

Lebanon, NH - USA

My Posts: All  Forum  Topic

I have gyro with limits and I just set it up in HH mode so its ok with me.. yeah. its so long that it actually give negative pitch unlike the older one.

The HBK3 frame is gonner, its a POS, it rear two servo's are slot fit and my favorite servo doesn't fit without mods. I'll have to grind a lot of it before ti will fit in slot.

so I got rid of the slot part completely and installed the servo but they move.I'll have to apply sticky tapes so that they won't move but it will be like BladeCP time come to change the servo's.. oh well. Will have to find better way to mount the rear servos'.

ಠ_ಠ HBK2 built with inexpensive parts! ٩๏̯͡๏)۶ Gaui425

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 385 views
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, November 20 - 11:24 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online