RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1010 views
Scorpion Power Scorpion Power
HelicopterBeginners Corner › Futaba S3010 servos
03-18-2009 08:13 PM  8 years agoPost 1
gjblackie

rrNovice

plymouth uk

My Posts: All  Forum  Topic

are these any good to run in a trex 700 nitrol not to clued up on servos cheers

PM  EMAIL  GALLERY  Attn:RR  Quote
03-18-2009 10:03 PM  8 years agoPost 2
UKhelinoob

rrApprentice

Michigan USA

My Posts: All  Forum  Topic

They will work but remember they are not Digital and only have nylon gears, and only one bearing too. If your on a budget like me and don't want to spend tooo much on servos (the cost will be quite high) Then these are a good choice for the price. and I do like the specs for a Standard dual bearing Servo (I have them in my X-Cell) only $22.99 each. Hobbico CS-64

This is the Hobbico High Torque Standard Servo with the Universal connector.
This general purpose servo may be used in on/off-road vehicles up to
1/8 scale, sport and high performance aircraft up to 1/4 scale,
and up to .60 size helicopters.

FEATURES: New composite gear train provides very high strength plus accurate
neutral precision and minimal backlash
Dual ball bearings
Three-pole Ferrite motor
Surface Mount Technology (SMT) design for reliability in high
vibration environments

SPECS: 4.8V 6V
Torque: 69.4 oz-in (5 kg-cm) 83 oz-in (6 kg-cm)
Speed: 0.18 sec 0.15 sec
Signal Pulse: Positive Pulse Control 1520us neutral
Weight 1.76oz (50g)
Length: 1.6" (40mm)
Width: .8" (20mm)
Height: 1.5" (39mm)

PM  EMAIL  GALLERY  Attn:RR  Quote
03-18-2009 10:42 PM  8 years agoPost 3
gjblackie

rrNovice

plymouth uk

My Posts: All  Forum  Topic

servos

thanks not so much on budget just saw them an wondered thanks again

PM  EMAIL  GALLERY  Attn:RR  Quote
03-19-2009 11:04 AM  8 years agoPost 4
NYXAR

rrNovice

Pearland TX usa

My Posts: All  Forum  Topic

Hobbico CS-64 does look like a good choice for the money. Thank you GMPnut

PM  EMAIL  GALLERY  Attn:RR  Quote
03-19-2009 12:15 PM  8 years agoPost 5
TachyonDriver

rrKey Veteran

Chipping, Lancs, UK

My Posts: All  Forum  Topic

The 3010s work fine on my Rappy 30, but a trex 700 is a far more vicious machine You'd probably want a better analogue servo at least....if not digital IMHO.

Tach.

Little Spinning Bundle of Joy® DON'T DISS THE DINO!!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-19-2009 10:15 PM  8 years agoPost 6
gjblackie

rrNovice

plymouth uk

My Posts: All  Forum  Topic

tanks i use specktrum in my raptor 30 and just bought the 700 so scouting around for electrics cheers

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1010 views
Scorpion Power Scorpion Power
HelicopterBeginners Corner › Futaba S3010 servos
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, November 23 - 7:26 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online