RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 631 views
Scorpion Power Scorpion Power
HelicopterFuel-Helicopters New or Limited ActivityElyQ › vision 50 questions
03-18-2009 06:53 PM  8 years agoPost 1
nismoflip

rrVeteran

Union City, CA, USA

My Posts: All  Forum  Topic

just saw the vid above and i'm pretty impressed with the performance and the proposed price when released here in the US. i have a few questions though:

1. i've only seen the solid models of the vision 50 assembly on their website. can someone comment on the plastics used for the airframe? are there fibers within the plastics? in general, is the plastic hard and brittle or slightly softer, etc.? just looking for more of a qualitative feel here in terms of how the frame would hold up with a not-so perfect auto for example.

2. from the solid models, it looks like the bottom frame are two halves and the top frame fastens onto the bottom frame. regarding the top and bottom frames, how many fasteners are holding the two (top and bottom) together? it looks like 6 from the drawings. has anyone had clutch mis-alignment issues? if the fasteners and mating materials are beefy enough with plenty of contact area between the frames, everything should be fine.

not trying to bash here, i don't know anyone that has one so i'd just like to do some research before i pick one up.

PM  EMAIL  GALLERY  Attn:RR
03-18-2009 07:04 PM  8 years agoPost 2
fr8brkr

rrVeteran

Asheville,NC

My Posts: All  Forum  Topic

Good luck "pickin one up" !! Nobody in the US stocks parts or kits.

Problems ? -- Mine are flown in fresh daily

PM  EMAIL  GALLERY  Attn:RR
03-18-2009 08:19 PM  8 years agoPost 3
jschenck

rrProfessor

La Vista, NE.

My Posts: All  Forum  Topic

1. The frame plastic feels 'stiffer' than my Raptor frame plastic. I'll report back as to the crashability of the Vision once I've put mine in. Hopefully it'll be a while

2. Pretty much it. My clutch didn't have a problem lining up. The assembly is really easy to put together.

I'm stuck with an issue with the flybar. I hope to post the issue here soon, perhaps someone else has ran into the issue and can help out. Still haven't flown mine

PM  EMAIL  GALLERY  Attn:RR
03-18-2009 08:44 PM  8 years agoPost 4
nismoflip

rrVeteran

Union City, CA, USA

My Posts: All  Forum  Topic

thanks for the responses

jschenck,

i look forward to your crash report

PM  EMAIL  GALLERY  Attn:RR
03-18-2009 10:58 PM  8 years agoPost 5
daredevil666

rrNovice

sweden

My Posts: All  Forum  Topic

jschenck are your flybar stuck??

PM  EMAIL  GALLERY  Attn:RR
03-19-2009 09:25 AM  8 years agoPost 6
DarkSoul666

rrNovice

Wolfsburg...the City​where Volkswagen is​built

My Posts: All  Forum  Topic

Don´t worry about he plastic used for the frames.
It is stiff enough.

The fasteners are solid an ther is problem to hold the upper and lower frame together.

Just buy one kit from the UK.
Fast-Lad oder midlandhelicopters sell them.

Greetings from Germany
Sebastian

PM  EMAIL  GALLERY  Attn:RR
03-19-2009 12:42 PM  8 years agoPost 7
jschenck

rrProfessor

La Vista, NE.

My Posts: All  Forum  Topic

here is the issue with my flybar

http://runryder.com/helicopter/t502374p1/

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 631 views
Scorpion Power Scorpion Power
HelicopterFuel-Helicopters New or Limited ActivityElyQ › vision 50 questions
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, November 19 - 3:21 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online