RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 448 views
Scorpion Power Scorpion Power
HelicopterAlignT-REX 700N › 700N, can someone measure the boom supports​please?
03-16-2009 11:45 PM  8 years agoPost 1
OICU812

rrMaster

Edson, Alberta,​Canada

My Posts: All  Forum  Topic

Looking into the possibility of usnig the Align 700N boom supports on another project, wondering if someone could measure theirs from end to end please? Also anyone know if Align is coming out with some with nice mtal ends or a good alternative for the bling factor? THX!

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-16-2009 11:51 PM  8 years agoPost 2
fiordaliso

rrApprentice

Bregenz/Austria

My Posts: All  Forum  Topic

The length of the boom supports is 60 cm (i.e.23,62 inches) and 62 cm (i.e.24,41 inches, end to end) respectively.

PM  EMAIL  Attn:RR  Quote
03-16-2009 11:51 PM  8 years agoPost 3
Andy_Johnstone

rrApprentice

Liverpool - England

My Posts: All  Forum  Topic

from the centre of the bolt holes theyre 62cm

Optifuel, NHP, Revolution Models, CSM Team pilot 2011

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-16-2009 11:54 PM  8 years agoPost 4
fiordaliso

rrApprentice

Bregenz/Austria

My Posts: All  Forum  Topic

I am sure you could use any boom supports of this world`s helicopter.
E. g. I liked the strong Raptor 90 SE supports and used them on a Vibe 90. They had metal ends on too.

Your choice.

PM  EMAIL  Attn:RR  Quote
03-16-2009 11:58 PM  8 years agoPost 5
fiordaliso

rrApprentice

Bregenz/Austria

My Posts: All  Forum  Topic

Andy,

I pushed the ends a bit more...
If you could estimate that extra in flying performance!

PM  EMAIL  Attn:RR  Quote
03-17-2009 12:56 AM  8 years agoPost 6
OICU812

rrMaster

Edson, Alberta,​Canada

My Posts: All  Forum  Topic

Thanks fellas. One more thing in regards to the T-Rex ones, are your ends metal? Also do they have a ball in them in which a 3mm bolt goes through to secure?

I ask this all as what I am doing is wanting to make some longer supports for the Logos I stretched to 700 size. The Logos have ends that have a large ball, I est 5-6mm in size and you use a 3mm bolt through to afix it to frame as well as the horizontal fin. Ideally I would like to continue that idea, would these 700N be appropriate then or anyone know of any similar that would work this route?

I know I could order another logo set, but they are 6mm, I would really like to get that extra 1mm like the 700N size has for a better look and being more rigid.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2009 02:12 AM  8 years agoPost 7
payne1967

rrElite Veteran

uk

My Posts: All  Forum  Topic

4mm bolts and plastic ends

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-17-2009 02:52 AM  8 years agoPost 8
OICU812

rrMaster

Edson, Alberta,​Canada

My Posts: All  Forum  Topic

hmmm ok that is not going to work then thank you for all of your info, I still make get a set and try to find some different ends, cheers.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2009 05:00 PM  8 years agoPost 9
payne1967

rrElite Veteran

uk

My Posts: All  Forum  Topic

or use the 4mm to 3mm blade bolt spacers

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 448 views
Scorpion Power Scorpion Power
HelicopterAlignT-REX 700N › 700N, can someone measure the boom supports​please?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, November 21 - 6:23 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online