RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1342 views
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › 14mz programming question - conditions programming
03-16-2009 03:51 PM  8 years agoPost 1
Ragz

rrApprentice

India

My Posts: All  Forum  Topic

I am trying to setup a trex 600n on a 14mz with a 608 reciever. I have enabled 3 conditions viz: idl1, idl2, and hold. These are besides the NORM condition.

I cannot understand how to activate these on the PITCH and THROTTLE curve setting screens. I can see the cond/modes change when I activate them using the requisite switch, but curves remain the same no matter what I do. If I setup a curve on NORM and flick the switch to go to IDL1 and change the curve, its basically changing the curve in NORM. I am surely missing out on something here. Seems like the conditions are not getting activated, only the screen shows the name change.

Thanks in advance.

Anurag

PM  EMAIL  Attn:RR  Quote
03-16-2009 05:46 PM  8 years agoPost 2
smallplanes

rrElite Veteran

S.C. ,SSA

My Posts: All  Forum  Topic

Thake it out of the group mode and put them all in single mode. If you don't it will do just what your talking about. I have a 12Z and there very close in programming so it should be the same.


Spectra G 26cc
Jewel
Bat 27cc
Trex 700<br

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-17-2009 04:44 AM  8 years agoPost 3
Ragz

rrApprentice

India

My Posts: All  Forum  Topic

Thanks for the advice. Will try this out today.

cheers

Anurag

PM  EMAIL  Attn:RR  Quote
03-17-2009 06:57 AM  8 years agoPost 4
Ragz

rrApprentice

India

My Posts: All  Forum  Topic

That worked. Thanks a lot. However, shouldnt this setting be default?

Anurag

PM  EMAIL  Attn:RR  Quote
03-17-2009 03:03 PM  8 years agoPost 5
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

However, shouldnt this setting be default?
The group is defalt. you will need the group for the gyro and throttle hold and the govenor. If you set everything in single mode and forgot to set the gyro in group mode you could crash your heli. Throttle curves is pretty much all i use in single mode.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2009 05:23 PM  8 years agoPost 6
smallplanes

rrElite Veteran

S.C. ,SSA

My Posts: All  Forum  Topic

I use single mode for everything,just don't forget to check all your settings very good before the first flight.


Spectra G 26cc
Jewel
Bat 27cc
Trex 700<br

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-23-2010 12:26 AM  7 years agoPost 7
CRCR

rrApprentice

Aus

My Posts: All  Forum  Topic

Should the Thottle hold throttle position be the same as the flight mode??

normal mode I have 0,50,50,50,50 - idle-up 1 I have 75,75,75,75,75.
But when I flip the throttle hold switch the curve is the same in both modes, it is set to "single" when in throttle hold but still don't seem to be able to match them up.

PM  EMAIL  Attn:RR  Quote
02-23-2010 12:37 AM  7 years agoPost 8
Mike0251

rrVeteran

Hills of the Blue​Ridge VA

My Posts: All  Forum  Topic

This is a great guide to get you'all started by some of the RR guru's.
http://www.littlerotors.com/article...0106/index.aspx

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2010 01:47 AM  7 years agoPost 9
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

Here are some team tips on how top program the 14 (and other radios too).

http://www.futaba-rc.com/team/team-tips.html

Also, Dr. Ben has a great primer on how to program the 14 for helis.

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2010 01:58 AM  7 years agoPost 10
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

Ooops! Cliff Hiatt and Wayne Mann did the heli 14MZ guide.

http://www.littlerotors.com/article...0106/index.aspx

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1342 views
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › 14mz programming question - conditions programming
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, November 24 - 2:54 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online